Roundabout Standard Editor: Roundel Geometry: Crown Lines

Expand Roundel Geometry and click on the Crown Lines tab.

Select Crown Lines to create crown lines automatically when the roundabout is placed.

There are two regions that may have crown lines; the approach roads (the arms) and the circulatory area. The approach road crown lines are defined on the Approach tab.

Within the circulatory area there are two types of crown lines that may be created; Island to Island or Circulatory.

• Island to Island Crown Lines are straight lines connecting the approach splitter island corner at the ICD with the exit splitter island corner on the next exit.
• Circulatory Crown Lines are concentric circles within the circulatory area.

The Primary Crown Line Offset is the distance of the crown line from the center island measured as a percentage of the circulatory width so a value of 0% would define a crown line at the center island and a value of 100% would define a crown line on the ICD.

If you want to define two crown lines on your circulatory area, select Add Secondary Crown Line and edit the Secondary Crown Line Offset if necessary.

In all cases the Max and Min values represent the limiting values from the adopted design standard and the Default value will be used when the roundabout is first placed. A default value MUST be provided but Max and Min may be blank if there is no limiting value.