Depending on the clips you load into Distort, you can use the Clip Display buttons to produce various effects, or to simply toggle on clips and mattes to facilitate your work. The following table shows how to set up the clips to produce various effects.
| Front1 | Front2 | Matte1 | Matte2 | Back | Effect |
|---|---|---|---|---|---|
| On | Off | Off | Off | Off | Warps theFront1 clip only. This is the same as loading only one input clip. |
| On | On | Off | Off | Off | Morphs between two clips. This is the same as loading two input clips. |
| On | Lock | Off | Off | Off | Wipes (page turns, rolls); regional warps (if the same clip is loaded as both the Front1 and Front2 clip). |
| On | Off | On | Off | Off | Warps the Front1 clip and Matte1 clip, composited on black. |
| On | On | On | Off | Off | Warps over a background with a matte clip. |
| On | Lock | On | Off | Off | Warps the Front1 and Matte1 clips composited on the Front2 clip. |
| On | On | On | On | On | Morphs between two clips and their mattes onto the selected background clip. |