To Edit Hole Dimensions

Modify dimensions on holes using the Hole Dimensions dialog box.

1. In the browser, right-click the hole feature and select Show Dimensions.
2. Double-click the hole dimension.
3. In the Hole Dimensions dialog box, modify the values.
   Note: If the hole does not contain the associated feature, values are unavailable.

   • Hole Diameter. Sets the value for the diameter of the hole. Enter a value, or click the arrow to select a value, use the Measure command, show Dimensions, or set tolerances in the Tolerance dialog box.
   • Counterbore Diameter. Sets the value for the diameter of the counterbore or countersink.
   • Hole Depth. Sets the value for the depth of the hole.
   • Counterbore Depth. Sets the value for the depth of the counterbore or spot face.
4. Click OK.