Use the elements in the dialog box to modify the parameters of an intersection.
- Element 1/Element 2
-
Element 1 and 2 can be a straight line or a circular arc.
Click the Highlight icon to show the element in the drawing.
Click the Graphic icon
to identify another element in the drawing. Specify an offset value to shift the element.
Specify an azimuth value to rotate the element.
- Point 1/Point 2
-
The orientation of element 1 is indicated by the direction of P1 and P2.
- Point 3/ Point 4
-
The orientation of element 2 is indicated by the direction of P3 and P4.
- Easting/ Northing/Elevation
-
Coordinates of the points. You can edit the coordinates or use the Graphic icon
to select another point. - Radius
-
Radius of the element, can be modified. Use the Reverse icon to switch between long arc and short arc.
- Azimuth
-
Use the azimuth to rotate the element. For tangents the azimuth value specifies in which quadrant the result is located.
Use the Reverse icon to reverse the line, which means to add 200 gon to the azimuth value.
- Intersection 1/ Intersection 2
-
Intersections with arcs have more than one result.
Use the Tangentials Reverse icon to toggle between point and tangents calculation.
Tangentials: If you define tangents, you can specify a radius: Type 0 or keep the value empty, if you want to calculate a straight line.
If you define a radius you can use the Show Next Reverse icon to show all possible locations of the tangential arc.