Meshop Editable_Mesh UI property methods

PLEASE NOTE:
All methods below are applicable on Editable Mesh only!

Methods:

meshop.getAffectBackfacing <Mesh mesh>

Returns the state of the Affect Backfacing checkbox in the Soft Selection rollout.

meshop.setAffectBackfacing <Mesh mesh> <boolean>

Sets the state of the Affect Backfacing checkbox in the Soft Selection rollout.

meshop.getBubble <Mesh mesh>

Returns the Bubble value in the Soft Selection rollout.

meshop.setBubble <Mesh mesh> <float>

Sets the Bubble value in the Soft Selection rollout.

meshop.getDisplacementMapping <Mesh mesh>

Returns the state of the Displacement Mapping option.

meshop.setDisplacementMapping <Mesh mesh> <boolean>

Sets the state of the Displacement Mapping option.

meshop.getExtrusionType <Mesh mesh>

Returns the Extrusion type:

1 - Group

2 - Local

meshop.setExtrusionType <Mesh mesh> <int>

Sets the Extrusion type:

1 - Group

2 - Local

meshop.getFalloff <Mesh mesh>

Returns the Falloff value in the Soft Selection rollout.

meshop.setFalloff <Mesh mesh> <float>

Sets the Falloff value in the Soft Selection rollout.

meshop.getIgnoreBackfacing <Mesh mesh>

Returns the state of the Ignore Backfacing checkbox in the Selection rollout.

meshop.setIgnoreBackfacing <Mesh mesh> <boolean>

Sets the state of the Ignore Backfacing checkbox in the Selection rollout.

meshop.getIgnoreVisEdges <Mesh mesh>

Returns the state of the Ignore Visible Edges checkbox in the Selection rollout.

meshop.setIgnoreVisEdges <Mesh mesh> <boolean>

Sets the state of the Ignore Visible Edges checkbox in the Selection rollout.

meshop.getNormalSize <Mesh mesh>

Returns the Scale value used for Normal display in the Selection rollout.

meshop.setNormalSize <Mesh mesh> <float>

Sets the Scale value used for Normal display in the Selection rollout.

meshop.getPinch <Mesh mesh>

Returns the Pinch value in the Soft Selection rollout.

meshop.setPinch <Mesh mesh> <float>

Sets the Pinch value in the Soft Selection rollout.

meshop.getPlanarThreshold <Mesh mesh>

Returns the Planar Thresh. value in the Selection rollout.

meshop.setPlanarThreshold <Mesh mesh> <float>

Sets the Planar Thresh. value in the Selection rollout.

meshop.getSelByVertex <Mesh mesh>

Returns the state of the By Vertex checkbox in the Selection rollout.

meshop.setSelByVertex <Mesh mesh> <boolean>

Sets the state of the By Vertex checkbox in the Selection rollout.

meshop.getShowFNormals <Mesh mesh>

Returns the state of the Show Normals checkbox in the Selection rollout when in Face, Polygon or Element Sub-Object Mode.

meshop.setShowFNormals <Mesh mesh> <boolean>

Sets the state of the Show Normals checkbox in the Selection rollout when in Face, Polygon or Element Sub-Object Mode.

meshop.getShowVNormals <Mesh mesh>

Returns the state of the Show Normals checkbox in the Selection rollout when in Vertex Sub-Object Mode.

meshop.setShowVNormals <Mesh mesh> <boolean>

Returns the state of the Show Normals checkbox in the Selection rollout when in Vertex Sub-Object Mode.

meshop.getSoftSel <Mesh mesh>

Returns the state of the Use Soft Selection checkbox in the Soft Selection rollout.

meshop.setSoftSel <Mesh mesh> <boolean>

Sets the state of the Use Soft Selection checkbox in the Soft Selection rollout.

meshop.getSplitMesh <Mesh mesh>

Returns the state of the Split Mesh checkbox in the Surface Properties rollout when in Object mode.

meshop.setSplitMesh <Mesh mesh> <boolean>

Sets the state of the Split Mesh checkbox in the Surface Properties rollout when in Object mode.

meshop.getSSEdgeDist <Mesh mesh>

Returns the Soft Selection Edge Distance value.

meshop.setSSEdgeDist <Mesh mesh> <int>

Sets the Soft Selection Edge Distance value.

meshop.getSSUseEdgeDist <Mesh mesh>

Returns the state of the Soft Selection Edge Distance checkbox.

meshop.setSSUseEdgeDist <Mesh mesh> <boolean>

Sets the state of the Soft Selection Edge Distance checkbox.

meshop.getSubdivisionAngle <Mesh mesh>

Returns the Subdivision Angle value.

meshop.setSubdivisionAngle <Mesh mesh> <float>

Sets the Subdivision Angle value.

meshop.getSubdivisionDisplacement <Mesh mesh>

Returns the state of the Subdivision Displacement checkbox.

meshop.setSubdivisionDisplacement <Mesh mesh> <boolean>

Sets the state of the Subdivision Displacement checkbox.

meshop.getSubdivisionDistance <Mesh mesh>

Returns the Subdivision Distance value.

meshop.setSubdivisionDistance <Mesh mesh> <float>

Sets the Subdivision Distance value.

meshop.getSubdivisionEdge <Mesh mesh>

Returns the Subdivision Edge value.

meshop.setSubdivisionEdge <Mesh mesh> <float>

Set the Subdivision Edge value.

meshop.getSubdivisionMaxLevels <Mesh mesh>

Returns the Maximum Subdivision Levels value found under Advanced Properties... dialog of the Subdivision Properties rollout.

meshop.setSubdivisionMaxLevels <Mesh mesh> <int>

Sets the Maximum Subdivision Levels value found under Advanced Properties... dialog of the Subdivision Properties rollout.

meshop.getSubdivisionMaxTriangles <Mesh mesh>

Returns the Maximum Number of Triangles value found under Advanced Properties... dialog of the Subdivision Properties rollout.

meshop.setSubdivisionMaxTriangles <Mesh mesh> <int>

Sets the Maximum Number of Triangles value found under Advanced Properties... dialog of the Subdivision Properties rollout.

meshop.getSubdivisionMethod <Mesh mesh>

Returns the Subdivision Method. It can be one of the following: #regular, #spatial, #curvature, #spatialAndCurvature

meshop.setSubdivisionMethod <Mesh mesh> {#regular | #spatial | #curvature | #spatialAndCurvature}

Sets the Subdivision Method.

meshop.getSubdivisionMinLevels <Mesh mesh>

Returns the Minimum Subdivision Levels value found under Advanced Properties... dialog of the Subdivision Properties rollout.

meshop.setSubdivisionMinLevels <Mesh mesh> <int>

Sets the Minimum Subdivision Levels value found under Advanced Properties... dialog of the Subdivision Properties rollout.

meshop.getSubdivisionSteps <Mesh mesh>

Returns the Subdivision Steps value.

meshop.setSubdivisionSteps <Mesh mesh> <int>

Sets the Subdivision Steps value.

meshop.getSubdivisionStyle <Mesh mesh>

Returns the Subdivision Style. It can be one of the following: #tree, #grid, #delaunay

meshop.setSubdivisionStyle <Mesh mesh> {#tree | #grid | #delaunay}

Sets the Subdivision Style.

meshop.getSubdivisionView <Mesh mesh>

Returns the state of the View-Dependent checkbox in the Surface Properties.

meshop.setSubdivisionView <Mesh mesh> <boolean>

Set the state of the View-Dependent checkbox in the Surface Properties.

meshop.getWeldPixels <Mesh mesh>

Returns the Target Weld pixels value.

meshop.setWeldPixels <Mesh mesh> <int>

Sets the Target Weld pixels value.

meshop.getWeldThreshold <Mesh mesh>

Returns the Weld Selected Threshold value.

meshop.setWeldThreshold <Mesh mesh> <float>

Sets the Weld Selected Threshold value.

PLEASE NOTE:
All methods above are applicable on Editable Mesh only!

Editable Mesh - Quick Navigation

Meshop Editable_Mesh UI property methods

See Also