Setting up PTC Creo Parametric for exporting files

You can export geometry from PTC Creo Parametric into Autodesk Moldflow Adviser.

1. Open Creo Parametric.
2. Open a model or create a new one.
3. Ensure the Autodesk Moldflow Adviser third party component is running: Click Tools>Tools> Applications. You should see Autodesk Moldflow Adviser icon.
4. If the icon is not there, follow the steps below.
   1. Select Tools > Auxiliary Applications. The Auxiliary Applications dialog is displayed.
   2. Select Autodesk Moldflow Adviser from the applications list.
   3. Select Start.
   4. Select Close.
5. Select Tools>Tools> Applications > Autodesk Moldflow Adviser.

Note: Autodesk Moldflow Adviser needs to be installed. Autodesk Moldflow Adviser can be closed when clicking the Autodesk Moldflow Adviser icon within the CAD product.