Turn on the
Isolate cause of warpage option if you want the warpage analysis to output information about the dominant cause of warpage.
If you set up a
Small deflection analysis and you turn on the
Isolate cause of warpage option, you receive four sets of deflection results representing the deflection of the part considering:
- All factors
- Deflections due to differential cooling
- Deflections due to differential shrinkage
- Deflections due to orientation effects
If you set up a
Buckling analysis and turn on the
Isolate cause of warpage option, the analysis log includes a sensitivity factor for each of the possible contributors to warpage:
- Differential cooling
- Differential shrinkage
- Orientation effects
Note: Isolating the cause of warpage with a buckling analysis is only available for Midplane meshes.