This page of the Process Settings Wizard, which can be accessed by clicking 
(), is used to specify the filling phase simulation related process settings for the selected analysis sequence.
Note: Some of the items listed below may not be available on the current dialog. This is dependent on the analysis technology, molding process and analysis sequence selected.
| Dialog Property | Comment |
|---|---|
| Consider mold thermal expansion | Select this check box if you want Warp or Stress analysis to consider the effect of mold thermal expansion on the warpage and/or molded-in stress levels in the part. |
| Use mesh aggregation and 2nd-order tetrahedral elements | Mesh aggregation is a technique which assumes that the tetrahedral mesh of your part is only two elements thick. Setting this option makes all tetrahedral elements second-order. To control settings more precisely, turn off this checkbox and click Advanced options. |
| Number of threads for parallelization | Select one of the drop-down options to configure parallel computation. This will improve solution speed, especially for large models. |
| AMG matrix solver selection |
The AMG solver improves the speed of the analysis by using progressively coarser mesh grids for computations. Select On to enable the Algebraic Multigrid (AMG) matrix solver. Select Off to disable the AMG solver. |