| Minimum number of required layers
|
Enter the criterion for refinement diagnostic. The default value is 6.
|
| Maximum allowed edge length ratio (internal/surface)
|
Enter the criterion for long edges diagnostic. The default value is 3.
|
| Maximum allowed volume ratio to average volume
|
Enter the criterion for large volume diagnostic. The default value is 20.
|
| Search for tetras with aspect ratio higher than
|
Enter the criterion for aspect ratio diagnostic. The default value is 100.
|
| Search for flat tetras with interfacial angle larger than (degrees)
|
Enter the criterion for large angle diagnostic. The default value is 178.
|
| Restrict to visible entities
|
Forces the Mesh Repair Wizard to ignore elements that are on hidden layers.
|
| Save Current Values
|
Use the values defined as your default settings. These values only last for the current session. Other studies can load and use the saved values.
|
| Load Saved Values
|
Repopulate the target values with values saved earlier in the session.
|