P Commands

Topics in this section

PIDANNOTATE
Places an annotation in a drawing.
PIDCONVERT
Adds data to an AutoCAD object to add it to reports.
PIDEDITBLOCK
Edits a P&ID component so that you can create a new instance of that object.
PIDTAG
Defines tagging data for a P&ID component or line.
PLANTAUDIT
Audits and repairs project data and drawing synchronization errors.
PLANTCOMPASS
Changes compass settings.
PLANTCONNECTJOINT
Connects two adjacent components with a new joint.
PLANTCONVERTLINETOPIPE
Converts AutoCAD line objects to Piping.
PLANTCUSTOMPARTS
Creates custom components and instrumentation.
PLANTDWGCHECKER
Runs a consistency check between the drawing text and the corresponding property values in the database.
PLANTDYNAMICTOOLPALETTE
Loads the dynamic pipe spec tool palette from the current spec.
PLANTEDITAUTODESKCONNECTIONPOINT
Modifies Autodesk Connection Point (ACP) properties.
PLANTEDITBEND
Creates a pipe bend.
PLANTENDCODES
Creates or modifies endcodes.
PLANTEQUIPMENTCREATE
Creates a new equipment model.
PLANTFITTINGADD
Places piping components.
PLANTFITTINGMOVE
Moves and copies piping components. Dynamic input is supported.
PLANTHIDE
Hides the selected objects.
PLANTISOADDINFO
Creates an Iso information item.
PLANTISOADDMSG
Creates a message on the drawing. Sets the message text, enclosure, and dimensioning.
PLANTISOTBTABLESETUP
Configures tables (BOM, Cut piece list, weld list, spool list) that display on an isometric drawing title block.
PLANTINVENTOREQUIPMENTCONVERT
Imports an Inventor AEC export file (*.adsk) as an AutoCAD Plant 3D equipment model.
PLANTINSERTAUTODESKCONNECTIONPOINT
Creates an Autodesk Connection Point (ACP) at an open port.
PLANTISOLATE
Hides everything except the selected Plant 3D objects.
PLANTMODIFYSHAREDCONTENTFOLDER
Sets the catalog file folder and migrates from earlier versions to AutoCAD Plant 3D if necessary.
PLANTORTHOCREATE
Creates a new orthographic view.
PLANTORTHOADJACENT
Creates an orthographic view adjacent to an existing view.
PLANTORTHOANNOTATE
Annotates components in ortho drawings.
PLANTORTHOLOCATE
Quickly locates an ortho component in the originating 3D model.
PLANTORTHOTEMPLATESETTINGS
Configures ortho layer mappings and specifies default styles.
PLANTORTHOADDJOG
Cuts out a specified portion of the OrthoCube to create an irregular-shaped view.
PLANTORTHOSHOWOPENPIPESYMBOL
Cycles through the open pipe symbol modes in ortho drawings: no cut-pipe symbols shown, only symbols on pipes or components cut by the OrthoCube shown (default), symbols on open-ended pipes as well as pipes or components cut by the OrthoCube shown.
PLANTORTHOPAPERCHECK
Displays an overlaid preview of the paper size in relation to the selected ortho view scale.
PLANTORTHOPIPEGAP
Creates, modifies, or removes pipe gaps to reveal or hide details behind the pipe.
PLANTPARTCONVERT
Converts an AutoCAD block to a piping component by adding ports.
PLANTPCFEXPORT
Exports a piping component file.
PLANTPCFTOISO
Creates an Iso from a PCF file.
PLANTPIDLINELIST
Places a 3D equivalent of a P&ID object in a Plant 3D model.
PLANTPIDSIZEMAPPING
Edits the size values from the default file that maps P&ID and Plant 3D objects and properties.
PLANTPIPEADD
Routes piping and inserts components.
PLANTPIPESLOPE
Edits the slope between two selected ports on a pipe run.
PLANTPIPESUPPORTADD
Adds pipe supports.
PLANTPRODUCTIONISO
Creates a production iso.
PLANTQUICKISO
Creates a quick iso.
PLANTREGISTERCUSTOMSCRIPTS
Registers a parametric model
PLANTREMOVEORPHANFASTENERS
Removes fasteners that are no longer part of a joint.
PLANTSHOWALL
Displays all Plant 3D objects in a drawing.
PLANTSIZEDISPLAYMODE
Displays component size only in project units or in both Imperial and metric units when the project and component units differ.
PLANTSPECVIEWER
Displays the current pipe spec.
PLANTSPECUPDATECHECK
Checks for changes made to spec files that are in use in a drawing.
PLANTSTEELMEMBER
Creates a structural member.
PLANTTAG
Tags a Plant 3D object.
PLANTWELDADD
Adds a weld to pipe.

Parent topic: Commands