To configure the title block drawing area

Set the size of the Isometric drawing areas and specify areas to exclude.

1. On the ribbon, click Home tab Project panel Project Manager Project Setup.
2. In the Project Setup dialog box, expand Isometric DWG Settings. Click Title Block and Display.
   
3. On the Title Block & Display pane, next to Iso Style, select a style from the drop-down list. Under Title Block Preview, click Set Up Title Block.
   
4. Do any of the following:
   • To adjust the green draw area - Click once in the green box and use the grips to resize the area. (Or, in the ribbon, Isometric Drawing Area panel, click Draw Area, and draw a rectangle.)
   • To define a no-draw area - In the ribbon, click No-Draw Area and draw a rectangle (red) overlapping the green draw area. The iso drawing will not extend into this blocked area.
   • To see exactly what area will contain the iso drawing - In the ribbon, click Area Visibility. A dotted line defining the isometric drawing area displays.
   • To place a table (BOM, cut piece, weld list, or spool list) - In the ribbon, Table Placement & Setup panel, click the table you want, and draw it on the drawing, usually in the blue table area.
   • To place the North Arrow - In the ribbon, North Arrow panel, click Place North Arrow. Select upper left, upper right, lower left, or lower right.
5. Click OK.