Define the Material Properties

We will now assign the material properties to all applicable parts. We can assign the material for the hand wheel and partial link in one operation since they have the same element type and material properties. Similarly, we can assign the material for the shaft extension and crank in one operation.

1. Click the Material heading under Part 1 < Hand Wheel > in the browser (tree view) to select it.
2. Holding down the Ctrl key, click the Material heading under Part 4 < Partial Link > in the browser to select it also.
3. Right-click one of the two selected headings and choose Edit Material from the context menu.
   1. Select Brass, Red under the Brass folder  within the Element Material Selection dialog.  The properties display in the section to the right.
   2. Click OK.
4. Select the Material heading under Part 2 < Shaft Extension > in the browser.
5. Hold  down the Ctrl key and click the Material heading under Part 3 < Crank > in the browser to select it also.
6. Right-click  one of the two selected headings and choose Edit Material from the context menu. 
   1. Select Steel (AISI 4130) under the AISI subfolder within the Steel folder in the Element Material Selection dialog.
   2. Click OK.
7. Double-click the Material heading under Part 7 < Centroid Mesh 1 > in the browser.
   1. Select Steel (ASTM - A36) under the ASTM subfolder within the Steel folder in the Element Material Selection dialog.
   2. Click OK.

Note: Material selection is not applicable to the rigid elements. Everything needed to define rigid element properties is contained within the Element Definition dialog.

Next