|
CgADist
|
Displays the total of several entered distances
|
|
CgAng
|
Displays acute and obtuse angle values between points or intersecting lines
|
|
CgCDist
|
Displays the distance between two or multiple points
|
|
CgList
|
Displays coordinate and geometric data for a selected line or arc
|
|
CgSList
|
Displays slope, gradient, and horizontal distance on a line or arc, or between two points
|
|
ContentBrowser
|
Opens the Autodesk Content Browser where you can access catalogs of metric and imperial tools to use for design creation
|
|
Drive
|
Displays a moving 3D view along a carriageway to create the appearance of driving through the model
|
|
DockCT
|
Docks the Coordinate Tracker utility
|
|
DockInquiry
|
Docks the Inquiry utility
|
|
FloatCT
|
Changes the Coordinate Tracker utility from docked to floating
|
|
FloatInquiry
|
Floats the Inquiry utility
|
|
HideCT
|
Hides the Coordinate Tracker utility
|
|
HideDrawingTips
|
Turns off the display of the Chainage Tracker
|
|
HideEventViewer
|
Hides the Event Viewer utility
|
|
HideInquiry
|
Hides the Inquiry utility
|
|
ObjectViewer
|
Displays the Object Viewer utility
|
|
Mapcheck
|
Checks the error of closure of a plot or survey figure from its labels, or from manual input of direction, distance, and curve data
|
|
MinDistBetweenElements
|
Identifies the shortest distance between two elements
|
|
MvBlockAdd
|
Inserts a multi-view block definition into a drawing
|
|
MvBlockDefEdit
|
Edits how a multi-view block appears in different view directions
|
| MvBlockEditAttributes
|
Edits the attributes defined for a multi-view block
|
| MvBlockEditViewBlockOffsets
|
Changes the offset of a multi-view block from its insertion point
|
| MvBlockUpdate
|
Updates the attributes of blocks in your drawing
|
|
Notes
|
Adds notes to a drawing
|
|
PointToPointCheck
|
Calculates a point to point sight distance check
|
|
ShowCT
|
Tracks the coordinates of the cursor in any coordinate system
|
|
ShowDrawingTips
|
Displays the Chainage Tracker in the current viewport
|
|
ShowDrawingTipsFull
|
Displays the Chainage Tracker in all viewports
|
|
ShowEventViewer
|
Opens the Event Viewer window where you can view messages that are logged during an AutoCAD Civil 3D session
|
|
ShowInquiry
|
Lists data about objects based on a selected inquiry type
|
|
SightDistanceCheck
|
Calculates sight distances along a carriageway with the Sight Distance Check Wizard
|
|
TraverseEditor
|
Creates 2D traverses from entered data or from a selected polyline
|
|
TraverseAdjustment
|
Applies an adjustment method to traverse data and creates reports
|
| TxConvertRW5ToFBK
|
Converts a RW5 file into an FBK file that can be imported into an AutoCAD Civil 3D survey database
|
| TxConvertStarNetDATtoFBK
|
Converts a Star*Net DAT file to an FBK file that can be imported into an AutoCAD Civil 3D survey database
|
| TxEditLsiFile
|
Edits a least squares input file
|
| TxLineDirectionDistance
|
Draws AutoCAD LINE segments by referencing quadrant bearings and distances, locations selected in the drawing, or COGO points
|
| TxManagePlotProperties
|
Manages plot properties and exports plot information to a CSV file
|
| TxQuickCrossSection
|
Creates temporary cross sections of a surface
|
| TxReportAlignOffset
|
Creates a report that lists information for staking out an offset alignment from chainages on the primary alignment
|
| TxReportCogoPoint
|
Creates a report that lists user-specified COGO point properties for a selection of points
|
| TxReportCorridorPoints
|
Creates a report that lists specified corridor point code properties, such as chainage and offset, relative to a specified alignment
|
| TxReportCorridorSlopeStake
|
Creates a report that lists the cross sectional and slope break data along the selected link within the selected corridor
|
| TxReportHorizAlign
|
Creates a report that lists the horizontal straight, curve, and chainage equation information for a range of chainages for specified alignments
|
| TxReportMetesAndBounds
|
Creates a report that lists legal descriptions in metes and bounds for a selected alignment, plot, or survey figure
|
| TxReportPointProx
|
Creates a report that lists duplicate points either in the drawing or a survey database that are located within a specified horizontal tolerance of each other
|
| TxReportProfGeom
|
Creates a report that lists profile curve design violations for overtaking sight distance, headlight sight distance, and stopping sight distance
|
| TxReportProfile
|
Creates a report that compares a profile's parameters with its specified design criteria
|
| TxReportProfilePVCurve
|
Creates a report that lists information for crest and sag vertical curves
|
| TxReportProfileVIPCurve
|
Creates a report that lists the chainage, level, and gradient out for each VIP in existing and finished ground profiles, as well as vertical curve information for finished ground profiles
|
| TxReportProjectSummary
|
Creates a report that lists information about project data, survey database information, and data shortcuts
|
| TxReportRadialConsecutiveInv
|
Creates a report that lists coordinate, angle and distance, and slope information for a list of specified COGO points, either consecutively, or radially from an occupied COGO point
|
| TxReportSurveyFigure
|
Creates a report that lists figure properties based on a selected survey database and user-specified filters
|
| TxReportSurveyFigureNode
|
Creates a report that lists user-specified survey figure node and point data based on a specified survey database and filters
|
| TxReportSurveyPoints
|
Creates a report that lists user-specified properties for all survey points in a specified survey database
|
| TxSurfaceHighLowPoints
|
Creates COGO points at the highest and lowest points within the boundary of a specified surface
|
|
VertDistBetweenElements
|
Identifies the vertical distance between two elements
|
|
ZoneOfVisualInfluence
|
Calculates a local visibility check
|