Adjust the fade, contrast, and monochrome settings of a DGN underlay.
You can change the default values for Fade, Contrast, and Monochrome for a single or multiple DGN underlays. To confirm the settings on a selected DGN underlay, use the Properties palette.
Note: You can also use the ADJUST command to change the fade, contrast, and monochrome settings for DGN underlays as well as DWF, DWFx and PDF underlays or the fade, contrast and brightness for images.
The following prompts are displayed.
- Select DGN Underlay
- Specifies one or more DGN underlay objects to be adjusted.
- Controls the fade effect of the underlay. Values range from 0 through 100. The greater the value, the more transparent the underlay appears against the background. The lesser the value, the less transparent and closer to opaque the underlay appears. A value of 0 makes the underlay appear fully opaque.
- Controls the contrast, and indirectly, the fading effect of the underlay. Values range from 0 through 100. The greater the value, the more each pixel is forced to its primary or secondary color.
- Controls the color saturation of all linework while maintaining the luminance. When turned on, the linework appears in varying shades of gray starting at black if the background color luminance is 50 percent or more. If the background color luminance is less than 50 percent, then the colors are inverted, with the darkest linework displaying in white, and the lightest linework displaying in black.