Double Click Action Object Name Property Reference

The Object Name property of a double click action must be a valid drawing interchange format (DXF ^™ ) name or one of the special names.

There are some exceptions as to when the DXF name is not used for the Object Name property of a double click action. These exceptions apply to objects that normally use the INSERT DXF name. For example, the double click action that works with dynamic blocks that contains one or more attributes uses the object name ATTDYNBLOCKREF.

The following table shows the DXF and object name for many of the objects commonly found in a drawing.

DXF Names for Commonly Used Objects
DXF Name	Description
3DFACE	3D face (AutoCAD only)
3DSOLID	3D solid (primitive and complex 3D solids) (AutoCAD only)
ACAD_PROXY_ENTITY	Object of an unknown type
ACDBPOINTCLOUD	Point cloud (AutoCAD only)
ACDBPOINTCLOUDEX	Point cloud (AutoCAD only)
ARC	3-point arc
ARRAY	Associative array
ATTDEF	Attribute definition that is not defined in a block
ATTRIB	Attribute defined in a block
BODY	Body (AutoCAD only)
CAMERA	Camera (AutoCAD only)
CIRCLE	Circle
DGNUNDERLAY	DGN file underlay
DIMENSION	Dimensions (all dimension objects)
DWFUNDERLAY	DWF file underlay
ELLIPSE	Ellipse and elliptical arc
EXTRUDEDSURFACE	3D extruded surface
GEOMAPIMAGE	Geographic map
HATCH	Hatch and gradient fill
HELIX	2D or 3D spiral (AutoCAD only)
IMAGE	Raster image
INSERT	The Object Names for the different types of block reference objects are as follows: ATTBLOCKREF Block reference with attributes ATTDYNBLOCKREF Dynamic block reference with attributes BLOCKREF Block reference without attributes CENTERMARK Center mark CENTERLINE Centerline DYNBLOCKREF Dynamic block reference without attributes XREF External reference (xref)
LEADER	Legacy leader
LIGHT	Point light, spotlight, web light, and distant light (AutoCAD only)
LINE	Line
LOFTEDSURFACE	3D lofted surface (AutoCAD only)
LWPOLYLINE	Lightweight polyline
MLINE	Multiline (AutoCAD only)
MTEXT	Multiline text
MULTILEADER	Multileader
PDFUNDERLAY	PDF file underlay
PLANESURFACE	Planar surface (AutoCAD only)
POINT	Point
POLYLINE	2D or 3D polyline
POSITIONMARKER	Geographic location position marker
RAY	Ray
REGION	2D region
REVOLVEDSURFACE	3D revolved surface (AutoCAD only)
SECTIONOBJECT	Section object (AutoCAD only)
SHAPE	Shape insert
SOLID	2D solid
SPLINE	B-spline curve
SWEPTSURFACE	3D swept surface (AutoCAD only)
TABLE	Table
TEXT	Single-line text
TOLERANCE	Geometric tolerance
TRACE	Trace
VIEWPORT	Floating viewport
WIPEOUT	Wipeout
XLINE	Construction line

Note: If more than one object is selected or if an object type is not associated with a double click action, the default command used is PROPERTIES.