artAttrPaintVertexCtx

Go to: Synopsis. Return value. Flags. MEL examples.

Synopsis

artAttrPaintVertexCtx [-accopacity boolean] [-activeListChangedProc string] [-afterStrokeCmd string] [-alphaclamp string] [-alphaclamplower float] [-alphaclampupper float] [-attrSelected string] [-beforeStrokeCmd string] [-brushalignment boolean] [-brushfeedback boolean] [-clamp string] [-clamplower float] [-clampupper float] [-clear] [-colorAlphaValue float] [-colorRGBAValue float float float float] [-colorRGBValue float float float] [-colorRamp string] [-colorfeedback boolean] [-colorfeedbackOverride boolean] [-colorrangelower float] [-colorrangeupper float] [-dataTypeIndex int] [-disablelighting boolean] [-dragSlider string] [-duringStrokeCmd string] [-dynclonemode boolean] [-exists] [-expandfilename boolean] [-exportaspectratio float] [-exportfilemode string] [-exportfilesave string] [-exportfilesizex int] [-exportfilesizey int] [-exportfiletype string] [-filterNodes] [-history boolean] [-image1 string] [-image2 string] [-image3 string] [-importfileload string] [-importfilemode string] [-importreassign boolean] [-interactiveUpdate boolean] [-lastRecorderCmd string] [-lastStampName string] [-lowerradius float] [-makeStroke uint] [-mappressure string] [-maxvalue float] [-minvalue float] [-name string] [-objattrArray string] [-opacity float] [-outline boolean] [-outwhilepaint boolean] [-paintComponent int] [-paintNodeArray string] [-paintNumChannels int] [-paintRGBA boolean] [-paintVertexFace boolean] [-paintattrselected string] [-paintmode string] [-paintoperationtype string] [-pickColor boolean] [-pickValue] [-playbackCursor float float] [-playbackPressure float] [-preserveclonesource boolean] [-profileShapeFile string] [-projective boolean] [-radius float] [-rampMaxColor float float float] [-rampMinColor float float float] [-record boolean] [-reflection boolean] [-reflectionaboutorigin boolean] [-reflectionaxis string] [-screenRadius float] [-selectclonesource boolean] [-selectedattroper string] [-showactive boolean] [-stampDepth float] [-stampProfile string] [-stampSpacing float] [-strokesmooth string] [-surfaceConformedBrushVertices boolean] [-tablet] [-tangentOutline boolean] [-toolOffProc string] [-toolOnProc string] [-useColorRamp boolean] [-useMaxMinColor boolean] [-usepressure boolean] [-value float] [-vertexColorRange boolean] [-vertexColorRangeLower float] [-vertexColorRangeUpper float] [-whichTool string] [-worldRadius float] [context]

artAttrPaintVertexCtx is undoable, queryable, and editable.

This is a context command to set the flags on the Paint color on vertex Tool context.

Return value

None

In query mode, return type is based on queried flag.

Flags

Long name (short name)	Argument types	Properties
-accopacity(-aco)	boolean
Sets opacity accumulation on/off. C: Default is false (Except for sculpt tool for which it is true by default). Q: When queried, it returns a boolean.
-activeListChangedProc(-alp)	string
Accepts a string that contains a MEL command that is invoked whenever the active list changes. There may be some situations where the UI, for example, needs to be updated, when objects are selected/deselected in the scene. In query mode, the name of the currently registered MEL command is returned and this will be an empty string if none is defined.
-afterStrokeCmd(-asc)	string
The passed string is executed as a MEL command immediately after the end of a stroke. C: Default is no command. Q: When queried, it returns the current command
-alphaclamp(-alc)	string
Specifies if the weight value should be alpha clamped to the lower and upper bounds. There are four options here: "none" - no clamping is performed, "lower" - clamps only to the lower bound, "upper" - clamps only to the upper bounds, "both" - clamps to the lower and upper bounds. C: Default is "none". Q: When queried, it returns a string.
-alphaclamplower(-acl)	float
Specifies the lower bound for the alpha values. C: Default is 0.0. Q: When queried, it returns a float.
-alphaclampupper(-acu)	float
Specifies the upper bound for the alpha values. C: Default is 1.0. Q: When queried, it returns a float.
-attrSelected(-asl)	string
Returns a name of the currently selected attribute. Q: When queried, it returns a string.
-beforeStrokeCmd(-bsc)	string
The passed string is executed as a MEL command immediately before the start of a stroke. C: Default is no command. Q: When queried, it returns the current command
-brushalignment(-bra)	boolean
Specifies the path brush alignemnt. If true, the brush will align to stroke path, otherwise it will align to up vector. C: Default is true. Q: When queried, it returns a boolean.
-brushfeedback(-brf)	boolean
Specifies if the brush additional feedback should be drawn. C: Default is TRUE. Q: When queried, it returns a boolean.
-clamp(-cl)	string
Specifies if the weight value should be clamped to the lower and upper bounds. There are four options here: "none" - no clamping is performed, "lower" - clamps only to the lower bound, "upper" - clamps only to the upper bounds, "both" - clamps to the lower and upper bounds. C: Default is "none". Q: When queried, it returns a string.
-clamplower(-cll)	float
Specifies the lower bound for the values. C: Default is 0.0. Q: When queried, it returns a float.
-clampupper(-clu)	float
Specifies the upper bound for the values. C: Default is 1.0. Q: When queried, it returns a float.
-clear(-clr)
Floods all cvs/vertices to the current value.
-colorAlphaValue(-cl1)	float
The Alpha value of the color.
-colorRGBAValue(-cl4)	float float float float
The RGBA value of the color.
-colorRGBValue(-cl3)	float float float
The RGB value of the color.
-colorRamp(-cr)	string
Allows a user defined color ramp to be used to map values to colors.
-colorfeedback(-cf)	boolean
Sets on/off the color feedback display. C: Default is FALSE. Q: When queried, it returns a boolean.
-colorfeedbackOverride(-cfo)	boolean
Sets on/off the color feedback override. C: Default is FALSE. Q: When queried, it returns a boolean.
-colorrangelower(-crl)	float
Specifies the value that maps to black when color feedback mode is on. C: Default is 0.0. Q: When queried, it returns a float.
-colorrangeupper(-cru)	float
Specifies the value that maps to the maximum color when color feedback mode is on. C: Default is 1.0. Q: When queried, it returns a float.
-dataTypeIndex(-dti)	int
When the selected paintable attribute is a vectorArray, it specifies which field to paint on.
-disablelighting(-dl)	boolean
If color feedback is on, this flag determines whether lighting is disabled or not for the surfaces that are affected. C: Default is FALSE. Q: When queried, it returns a boolean.
-dragSlider(-dsl)	string
Sets the current brush drag state for resizing or offsetting the brush (like the 'b' and 'm' default hotkeys). The string argument is one of: "radius", "lowradius", "opacity", "value", "depth", "displacement", "uvvector" or "none". C: Default is "none".
-duringStrokeCmd(-dsk)	string
The passed string is executed as a MEL command during the stroke, each time the mouse is dragged. C: Default is no command. Q: When queried, it returns the current command
-dynclonemode(-dcm)	boolean
Enable or disable dynamic clone mode.
-exists(-ex)
Returns true or false depending upon whether the specified object exists. Other flags are ignored.
-expandfilename(-eef)	boolean
If true, it will expand the name of the export file and concatenate it with the surface name. Otherwise it will take the name as it is. C: Default is true.
-exportaspectratio(-ear)	float
Value of aspect ratio for export
-exportfilemode(-efm)	string
Specifies the export channel.The valid entries here are: "alpha", "luminance", "rgb", "rgba". C: Default is "luminance/rgb". Q: When queried, it returns a string.
-exportfilesave(-esf)	string
Exports the attribute map and saves to a specified file.
-exportfilesizex(-fsx)	int
Specifies the width of the attribute map to export. C: Default width is 256. Q: When queried, it returns an integer.
-exportfilesizey(-fsy)	int
Specifies the width of the attribute map to export. C: Default width is 256. Q: When queried, it returns an integer.
-exportfiletype(-eft)	string
Specifies the image file format. It can be one of the following: "iff", "tiff", "jpeg", "alias", "rgb", "fit" "postScriptEPS", "softimage", "wavefrontRLA", "wavefrontEXP". C: default is tiff. Q: When queried, it returns a string.
-filterNodes(-fon)
Sets the node filter.
-history(-ch)	boolean
If this is a tool command, turn the construction history on for the tool in question.
-image1(-i1)	string
First of three possible icons representing the tool associated with the context.
-image2(-i2)	string
Second of three possible icons representing the tool associated with the context.
-image3(-i3)	string
Third of three possible icons representing the tool associated with the context.
-importfileload(-ifl)	string
Load the attribute map a specified file.
-importfilemode(-ifm)	string
Specifies the channel to import. The valid entries here are: "alpha", "luminance", "red", "green", "blue", and "rgb" C: Default is "alpha". Q: When queried, it returns a string.
-importreassign(-irm)	boolean
Specifies if the multiply atrribute maps are to be reassigned while importing. Only maps previously exported from within Artisan can be reassigned. C: Default is FALSE. Q: When queried, it returns a boolean.
-interactiveUpdate(-iu)	boolean
Specifies how often to transfer the painted values into the attribute. TRUE: transfer them "continuously" (many times per stroke) FALSE: transfer them only at the end of a stroke (on mouse button release). C: Default is TRUE. Q: When queried, it returns a boolean.
-lastRecorderCmd(-lrc)	string
Value of last recorded command.
-lastStampName(-lsn)	string
Value of the last stamp name.
-lowerradius(-lr)	float
Sets the lower size of the brush (only apply on tablet).
-makeStroke(-mst)	uint
Stroke point values.
-mappressure(-mp)	string
Sets the tablet pressure mapping when the table is used. There are four options: "none" - the pressure has no effect, "opacity" - the pressure is mapped to the opacity, "radius" - the is mapped to modify the radius of the brush, "both" - the pressure modifies both the opacity and the radius. C: Default is "none". Q: When queried, it returns a string.
-maxvalue(-mxv)	float
Specifies the maximum value for each attribute. C: Default is 1.0. Q: When queried, it returns a float.
-minvalue(-miv)	float
Specifies the minimum value for each attribute. C: Default is 0.0. Q: When queried, it returns a float.
-name(-n)	string
If this is a tool command, name the tool appropriately.
-objattrArray(-oaa)	string
An array of all paintable attributes. Each element of the array is a string with the following information: NodeType.NodeName.AttributeName.MenuType. *MenuType: type (level) of the item in the Menu (UI). Q: When queried, it returns a string.
-opacity(-op)	float
Sets the brush opacity. C: Default is 1.0. Q: When queried, it returns a float.
-outline(-o)	boolean
Specifies if the brush should be drawn. C: Default is TRUE. Q: When queried, it returns a boolean.
-outwhilepaint(-owp)	boolean
Specifies if the brush outline should be drawn while painting. C: Default is FALSE. Q: When queried, it returns a boolean.
-paintComponent(-pc)	int
Specifies whether face or vertex or vertex face is being painted. 1 - Vertex 2 - VertexFace 3 - Face C: Default is Vertex. Q: When queried, it returns a int.
-paintNodeArray(-pna)	string
An array of paintable nodes. Q: When queried, it returns a string.
-paintNumChannels(-pnc)	int
Number of channels to paint - 1 (alpha), 3 (RGB), or 4 (RGBA)
-paintRGBA(-pc4)	boolean
Specifies whether RGB or RGBA channels are being painted. TRUE: RGBA channels. FALSE: RGB channels. Alpha channel remains unaffected. C: Default is FALSE (Painting RGB channels). Q: When queried, it returns a int.
-paintVertexFace(-pvf)	boolean
Specifies whether vertex face is being painted. TRUE: Vertex face being painted. (Allows each face connected to the vertex to be painted) FALSE: Vertex being painted.(affects all connected faces) C: Default is FALSE. Q: When queried, it returns a int.
-paintattrselected(-pas)	string
An array of selected paintable attributes. Each element of the array is a string with the following information: NodeType.NodeName.AttributeName.
-paintmode(-pm)	string
Specifies the paint mode. There are two possibilities: "screen" and "tangent". C: Default is "screen". Q: When queried, it returns a string.
-paintoperationtype(-pot)	string
Specifies the operation type used by the Paint Tool. Currently, we support the following paint modes: "Paint", "Smear", "Blur", "Erase" and "Clone". Default is "Paint".
-pickColor(-pcm)	boolean
Set pick color mode on or off
-pickValue(-pv)
Toggle for picking
-playbackCursor(-plc)	float float
Values for the playback cursor.
-playbackPressure(-plp)	float
Valus for the playback pressure.
-preserveclonesource(-pcs)	boolean
Whether or not to preserve a clone source.
-profileShapeFile(-psf)	string
Passes a name of the image file for the stamp shape profile.
-projective(-prm)	boolean
Specifies the projective paint mode. C: Default is 'false'. Q: When queried, it returns a boolean.
-radius(-r)	float
Sets the size of the brush. C: Default is 1.0 cm. Q: When queried, it returns a float.
-rampMaxColor(-rxc)	float float float
Defines a special color to be used when the value is greater than or equal to the maximum value.
-rampMinColor(-rmc)	float float float
Defines a special color to be used when the value is less than or equal to the minimum value.
-record(-rec)	boolean
Toggle on for recording.
-reflection(-rn)	boolean
Specifies the reflection mode. C: Default is 'false'. Q: When queried, it returns a boolean.
-reflectionaboutorigin(-rno)	boolean
Toggle on to reflect about the origin
-reflectionaxis(-ra)	string
Specifies the reflection axis. There are three possibilities: "x", "y" and "z". C: Default is "x". Q: When queried, it returns a string.
-screenRadius(-scR)	float
Brush radius on the screen
-selectclonesource(-scs)	boolean
Toggle on to select the clone source
-selectedattroper(-sao)	string
Sets the edit weight operation. Four edit weights operations are provided : "absolute" - the value of the weight is replaced by the current one, "additive" - the value of the weight is added to the current one, "scale" - the value of the weight is multiplied by the current one, "smooth" - the value of the weight is divided by the current one. C: Default is "absolute". Q: When queried, it returns a string.
-showactive(-sa)	boolean
Sets on/off the display of the surface isoparms. C: Default is TRUE. Q: When queried, it returns a boolean.
-stampDepth(-stD)	float
Depth of the stamps
-stampProfile(-stP)	string
Sets the brush profile of the current stamp. Currently, the following profiles are supported: "gaussian", "soft", "solid" and "square". C: Default is gaussian. Q: When queried, it returns a string.
-stampSpacing(-stS)	float
Specifies the stamp spacing. Default is 1.0.
-strokesmooth(-ssm)	string
Stroke smoothing type name
-surfaceConformedBrushVertices(-scv)	boolean
Enables/disables the the display of the effective brush area as affected vertices.
-tablet(-tab)
Returns true if the tablet device is present, false if it is absent
-tangentOutline(-to)	boolean
Enables/disables the display of the brush circle tangent to the surface.
-toolOffProc(-tfp)	string
Accepts a strings describing the name of a MEL procedure that is invoked whenever the tool is turned off. For example, cloth invokes "clothPaintToolOff" when the cloth paint tool is turned on. Define this callback if your tool requires special functionality when your tool is deactivated. It is typical that if you implement a toolOffProc you will want to implement a toolOnProc as well (see the -toolOnProc flag. In query mode, the name of the currently registered MEL command is returned and this will be an empty string if none is defined.
-toolOnProc(-top)	string
Accepts a strings describing the name of a MEL procedure that is invoked whenever the tool is turned on. For example, cloth invokes "clothPaintToolOn" when the cloth paint tool is turned on. Define this callback if your tool requires special functionality when your tool is activated. It is typical that if you implement a toolOnProc you will want to implement a toolOffProc as well (see the -toolOffProc flag. In query mode, the name of the currently registered MEL command is returned and this will be an empty string if none is defined.
-useColorRamp(-ucr)	boolean
Specifies whether the user defined color ramp should be used to map values from to colors. If this is turned off, the default greyscale feedback will be used.
-useMaxMinColor(-umc)	boolean
Specifies whether the out of range colors should be used. See rampMinColor and rampMaxColor flags for further details.
-usepressure(-up)	boolean
Sets the tablet pressure on/off. C: Default is false. Q: When queried, it returns a boolean.
-value(-val)	float
Specifies the value for each attribute. C: Default is 0.0. Q: When queried, it returns a float.
-vertexColorRange(-vcr)	boolean
Specifies whether the vertex color range should be applied to the currently selected object. C: Default is false Q: When queried, it returns a boolean.
-vertexColorRangeLower(-vcl)	float
Specifies the min value of the vertex color range. C: Default is 0.0. Q: When queried, it returns a float.
-vertexColorRangeUpper(-vcu)	float
Specifies the max value of the vertex color range. C: Default is 1.0. Q: When queried, it returns a float.
-whichTool(-wst)	string
The string defines the name of the tool to be used for the Artisan context. An example is "artClothPaint". In query mode, the tool name for the given context is returned. Note: due to the way MEL works, always specify the -query flag last when specifying a flag that takes arguments.
-worldRadius(-wlR)	float
Radius in worldspace

Flag can appear in Create mode of command	Flag can appear in Edit mode of command
Flag can appear in Query mode of command	Flag can be used more than once in a command.

MEL examples

// Create a new vertexAttr paint context, then switch to it
artAttrPaintVertexCtx artAttrPaintVertexCtx1;
setToolTo artAttrPaintVertexCtx1;