Deleting an anchor plane

Any anchors that you have created can be permanently removed from the model.

Before you delete an anchor, make sure you have a deflection result displayed and an anchor plane created.

You can access all existing anchor planes by clicking Manage Anchor Planes in the Warpage Visualization Tools dialog.

Note: Deleting an anchor plane is not the same as restoring the original anchor plane. The Restore Original Position command does not actually delete the anchor planes.

1. Click (Results tab > Warpage panel > Visualize). The Warpage Visualization Tools dialog appears.
2. Select Anchors from the box on the left of the dialog.
3. Click Manage Anchor Planes and then select the anchor to be deleted from the Anchors dialog.
4. Click Delete to delete the anchor plane.
5. Click Close twice to exit the dialogs.