| E5125
|
FATAL ERROR: E5125
|
DESIGN OPTIMIZATION NOT DEFINED PROPERLY, STATUS:
n
|
|
|
Cause:
|
A topological design optimization was not defined properly. The status codes have the following meaning:
| Code
|
Meaning
|
|---|
| 1
|
No topological elements defined.
|
| 2
|
A
DRESP1 Bulk Data entry referenced a mode number out of the range of modes extracted in a modal solution.
|
| 3
|
The optimization objective was stress and all stresses in the specified design region were zero.
|
| 4
|
Minimum member size too small.
|
|
|
|
Action:
|
| Code
|
Meaning
|
|---|
| 1
|
Correct the
TOPVAR Bulk Data entry property reference.
|
| 2
|
Correct the
TOPVAR Bulk Data entry parameters.
|
| 3
|
Correct either the
EIGRL or
DRESP1 Bulk Data entries.
|
| 4
|
Correct the TDMIN value on the
TOPVAR Bulk Data entry.
|
|
|
|
Remarks:
|
None.
|