Fascia

You can add fascia to edges of roofs, soffits, and other fascia. You can also add fascia to model lines.

You can place fascias in 2D views, such as plan or section views, or 3D views.

Topics in this section

Add Fascia
Use the Fascia tool to add fascia to edges of roofs, soffits, model lines, and other fascia.
Work with Fascia
After adding fascia, you can add and remove segments, flip its orientation, and resize the fascia.
Change Fascia Mitering
When the fascia on a gable end of a roof does not wrap the corner, the end is mitered. You can specify the mitering option: vertical, horizontal, or perpendicular.
Move Fascia
You can change the horizontal or vertical offset of a fascia either through its properties or by graphically moving the fascia.
Fascia and Gutter Type Properties
Modify type properties for fascia and gutters to change the family's profile, material, and more.
Fascia and Gutter Instance Properties
Modify instance properties for fascia and gutters to change an individual element's angle, offset, and more.

Parent topic: Roofs