Use the Translate dialog to translate selected elements in the active Face window. When working in:
- CAD mode, you can translate selected geometry.
- CAM mode, you can translate selected holes and/or profiles.
To display the Translate dialog, select the elements that you want to translate in the active Face window, then select Edit > Transform > Translate.
Tip: You can also use the Translate 
button the Face Window toolbar in CAD mode to display this dialog.
button the Face Window toolbar in CAD mode to display this dialog.The following settings are available:
Multiple Copies — Select this option to copy the selected elements.
No. of Copies — If Multiple Copies is selected, enter the number of copies to create. This must be a value between 1 and 99.
Method — Select the method you want to use to translate the selected elements:
- Distance — Select to translate the selected elements using the coordinate values specified in the Horizontal Distance and Vertical Distance fields.
- Distance, Angle — Select to translate the selected elements using the values specified in the Distance and Angle fields.
- From Point, To Point — Select to translate the selected elements using the values specified in the z1, y1 and z2, y2 fields. There are two ways to specify these values:
- Entering coordinate values in the fields.
- Clicking
and selecting the point interactively. PartMaker displays a cross-hair cursor for you to select a center point in the Face window. The Snap Modes toolbar also appears for you to select a snap mode.
Translate — Click to translate the selected elements using the settings specified in the dialog.