Numeric drilling and threading type cycle words [TURN]

Reserved word	Definition
<DEPTH>	This word has different values for different operations: Tap operation - calculated depth of tap. Twist drill operation - calculated depth of drilling operation including tip. Turning, Boring, and Face operations - depth of cut. Groove operation - depth of cut.
<END-X>	The X location where the thread cutting pass ends. This is usually the same as <START-X> except for tapered threads.
<END-Z>	The Z location where the thread cutting pass ends.
<ENG-ANGLE>	Corresponds to the 90 - Infeed Angle threading attribute.
<LEADX>	Calculated tip to tip X axis lead.
<LEADZ>	Corresponds to Pitch thread dimension.
<MIN-INFEED>	Corresponds to the Min Infeed attribute.
<NUM-SPRING>	Number of thread spring passes. Corresponds to Spring Passes threading attribute.
<NUM-THREAD>	Number of thread passes.
<RTR-ANGLE>	Corresponds to Withdraw Angle.
<RTR-ANGLE90>	Withdraw Angle - 90. This parameter was added to support threading on a Fanuc. On that controller, a vertical retract is considered to be 0, not 90.
<START-X>	The X location where the thread cutting pass starts.
<START-Z>	The Z location where the thread cutting pass starts.
<STEP1>	This word has different values for different operations: Thread operation - Step 1 of threading pass. Drill operation - First peck. Groove operation - Stepover %.
<STEP2>	This word has different values for different operations: Thread operation - Step 2 of threading pass. Drill operation - Second peck.
<TAPER-ANGLE>	Returns the taper Angle entered on the Dimensions tab of the Thread Properties dialog.
<TAPER-DEPTH>	The Z distance between the lowest and highest points on the thread.
<THRD-DEPTH>	Corresponds to Thread Height in FeatureTURN.
<TIP-ANGLE>	The tip angle of the tool.