PMOPT

Some XBUILD reserved words have no equivalent in PMOPT. However these are available as PMOPT user-defined parameters:

XBUILD reserved word	PMOPT user-defined parameter
`<P1>`	`udp_P1`
`<P2>`	`udp_P2`
…	…
`<P100>`	`udp_P100`
`<FIXTURE>`	`udp_FIXTURE`

Note: Some PMOPT capabilities are not supported by XBUILD. For example, XBUILD supports much wider variety of NC output for 2-axis milling than is currently unavailable in PMOPT. So if you choose PMOPT you lose such control of your NC code. PMOPT files do not support Turning and Wire EDM.