rigidConstraint

Go to: Related nodes. Attributes.

This node contains the attributes for the rigid constraints. These constraints can only be used with rigid bodies. The constraints include the following:

nail: Constrains a rigid body to a point in world space.

pin: Constrains two rigid bodies together. By default the constraint is created at the midpoint between the two rigid bodies.

hinge: The hinge constrains the rigid body to an arbitrary axis restricting it to two degrees of freedom. This constraint can act on one or two rigid bodies. If one rigid body is selected the body is hinged to a point in world space. If two rigid bodies are selected the two rigid bodies are hinged. By default the constraint is created at the midpoint between the two rigid bodies.

spring: The spring constraint creates a spring which can act on one or two rigid bodies. If one rigid body is selected a spring is create which will constrain the rigid body to a point in world space. If two rigid bodies are selected a spring will be created between the two rigid bodies.

barrier: The barrier constraint limits the position of a rigid body to one side of an arbitrary plane. The constraint point is the center of mass of the rigid body.

Related nodes

dynBase, field, airField, turbulenceField, radialField, vortexField, newtonField, volumeAxisField, dragField, uniformField, gravityField, pointEmitter, particle, rigidBody, geoConnectable, spring

Attributes (36)

angularVelocity, angularVelocityX, angularVelocityY, angularVelocityZ, constrain, constraintType, force, forceX, forceY, forceZ, initialOrientation, initialOrientationX, initialOrientationY, initialOrientationZ, initialPosition, initialPositionX, initialPositionY, initialPositionZ, interpenetrate, isBounded, isParented, relativeTo, rigidBody1, rigidBody2, solverId, springDamping, springRestLength, springStiffness, userDefinedPosition, userDefinedPositionX, userDefinedPositionY, userDefinedPositionZ, velocity, velocityX, velocityY, velocityZ

Long name (short name)	Type	Default	Flags
angularVelocity (avl)	double3	0, 0, 0
angularVelocity of the rigid constraint
angularVelocityX (avx) double 0.0 angularVelocity x of the rigid constraint.
angularVelocityY (avy) double 0.0 angularVelocity y of the rigid constraint.
angularVelocityZ (avz) double 0.0 angularVelocity z of the rigid constraint.
constrain (con)	bool	true
The rigid constraint is on or off in the simulator if true.
constraintType (typ)	enum	1
Constraint type. The enum values are historical.
force (for)	double3	0, 0, 0
the force on the constraint.
forceX (frx) double 0.0 the force in the x direction on the constraint.
forceY (fry) double 0.0 the force in the y direction on the constraint.
forceZ (frz) double 0.0 the force in the z direction on the constraint.
interpenetrate (int)	bool	false
interpenetration flag.
isBounded (bon)	bool	false
indicates if the constraint is bounded to a bounding box. Used so we do not clip the constraint when part of it is off the screen.
isParented (par)	bool	false
set if the rigid constraint is parented.
initialOrientation (ino)	double3	0, 0, 0
The initial orientation of the rigid body constraint.
initialOrientationX (iox) angle (double) 0.0deg The X component of the initial orientation.
initialOrientationY (ioy) angle (double) 0.0deg The Y component of the initial orientation.
initialOrientationZ (ioz) angle (double) 0.0deg The Z component of the initial orientation.
initialPosition (ip)	double3	0, 0, 0
Initial position of the rigid body constraint.
initialPositionX (ipx) double 0.0 The X component of the initial position.
initialPositionY (ipy) double 0.0 The Y component of the initial position.
initialPositionZ (ipz) double 0.0 The Z component of the initial position.
relativeTo (rlt)	enum	0
Dtermines which rigid body the constraint shoul dbe recreated at.
rigidBody1 (rb1)	Message	n/a
The first rigid body to be constrained.
rigidBody2 (rb2)	Message	n/a
The second rigid body to be constrained.
solverId (sid)	integer	-1
this is the index into the solver multi attributes.
springDamping (dmp)	double	0.1
spring damping value.
springRestLength (srl)	double	1.0
spring rest length.
springStiffness (sst)	double	5.0
spring constraint stiffness
userDefinedPosition (udp)	double3	0, 0, 0
position at which the constraint will be recreated at.
userDefinedPositionX (upx) double 0.0 user defined position x.
userDefinedPositionY (upy) double 0.0 user defined position y.
userDefinedPositionZ (upz) double 0.0 user defined position z.
velocity (vel)	double3	0, 0, 0
velocity of the rigid constraint
velocityX (vlx) double 0.0 velocity x of the rigid constraint.
velocityY (vly) double 0.0 velocity y of the rigid constraint.
velocityZ (vlz) double 0.0 velocity z of the rigid constraint.