To set up a 3D residual stress analysis, either follow the order of the buttons on the Home tab of the ribbon UI, or follow the order of the items in the Study Tasks pane. Make sure you have a 3D model, and that you select an analysis sequence that includes Fill+Pack+Warp or Cool+Fill+Pack+Warp.
You can run a 3D residual stress with the following mesh types:
3D
and for all analysis sequences that include:
- Fill+Pack+Warp
- Cool+Fill+Pack+Warp.
The 3D residual stress model is selected by default.
When all the items in the Study Tasks pane have check marks against them, the analysis is ready to launch.
| Setup task | Analysis technology |
|---|---|
| Select the Molding process |
|
| Mesh the model |
|
| Check the mesh before analysis |
|
| Select an analysis sequence that includes Fill+Pack+Warp or Cool+Fill+Pack+Warp |
|
| Select a material that you have had characterized for 3D residual stress |
|
| Set an injection location |
|
| Set the velocity/pressure switchover point |
|
| Enter the process settings |
|
| Select the Uncorrected residual stress model |
|