To control the coolant in the cooling circuits (channels), you can either specify a coolant pressure, coolant flow rate, or a Reynolds number.
If the flow rate of the coolant is not known, you can use the Reynolds number to define the flow rate.
Note: This topic describes setting coolant control for an existing coolant inlet. You can also set coolant control when setting a new coolant inlet.
Right-click the arrow on the inlet of the cooling circuit you want to adjust and select
Properties from the drop-down menu.
In the
Coolant inlet dialog, select the coolant control method from the drop-down menu. The options include coolant pressure, flow rate, and Reynolds number.
Enter an appropriate value associated with the coolant control method you have chosen.
Click
OK, to save the entries and close the dialog.