This dialog is used to edit the properties of elements or regions of type In-mold label.
To access this dialog to edit the properties of existing model entities, select at least one element or region of type
In-mold label, then either select
(), or press
Alt-Enter, or right-click and select
Properties.
The collection of property values defined on the dialog are saved to a property set with the description shown in the Name box. In addition, you may be given the option to also apply the property values to related entities in the model.
| Dialog element | Explanation |
|---|---|
| Material from which this feature is made | Use the drop-down menu to select whether you want the feature to be constructed from resin or metal. An insert block can be a non-plastic material (usually metal) that is molded into the part, or pressed into the part after molding, in order to achieve a desired cavity shape and/or cooling effect.
Click Select to edit the properties of the selection you made. |
| Interface conductance | Specifies the ability of heat to be dissipated from the selected region of the mold. A greater interface conductance means the greater the ability for heat to be extracted. Enter the required interface conductance value.
Note: You can specify interface conductances for an in mold label, mold insert, or a parting surface.
|
| Thickness | Specifies the required thickness of the model area represented by the selected element(s).
Enter the required element thickness. |