Setting Injection Locations for Overmolding

1. Ensure that you have done the following first:
   1. Set the molding process.
   2. Selected the analysis sequence.
   3. Performed the required analysis setup tasks.
   4. Selected a material for the overmolded component.
   5. Set the injection locations for the first component.
      Note: If you want to control the exact position of the injection nodes, specify the injection locations on the CAD body before meshing.
2. Click (Boundary Conditions tab > Injection Locations panel > Overmolding Locations), or double-click the Set Overmolding Injection Location(s) icon in the Study Tasks pane.
   Note: Cross-hairs appear, indicating that the injection location mode is activated.
3. Click the cross-hairs on the model where polymer is to be injected.

   A cone appears, indicating that you have successfully set the injection location on the model.

4. Right-click the cross-hairs on the injection location cone and select Finish Set Injection Locations.
5. Click from the Quick Access toolbar, or click then (Save > Save Study) to save the injection location on your model.