The General tab of this dialog is used to specify values for certain inputs common to all reactive processes.
| Dialog element - General tab | Explanation |
|---|---|
| Molding material | Select and edit the material to analyze. |
| Mold material | Allows you to select and edit the mold material to be used during the analysis. You can specify the density, specific heat, and thermal conductivity of the mold material. |
| Compression press controller | Allows you to select and edit a process controller to control the injection molding process during the analysis. |
| Wire material | Allows you to select and/or edit a predefined compression press controller to be used for the Injection-compression analysis. |
| Leadframe material | Allows you to select and/or edit the wire material to be used in the microchip encapsulation process. |
| Process controller | Allows you to select and/or edit the leadframe material to be used in the microchip encapsulation process. |
| Solver parameters | Allows you to select and edit the solver parameters to be used during the analysis. For example, you can configure intermediate results, mold/melt convergence criteria, and analysis restart settings. |
| Injection molding machine | Select and edit an injection molding machine to simulate your molding machine during the analysis. You can configure the injection unit, hydraulic unit, and clamping unit. |
| Dialog element - Underfill tab | |
|---|---|
| Underfill encapsulant | Click Edit to edit the properties of the default underfill encapsulant, or click Select to choose an alternate underfill encapsulant from the supplied database. |
| Underfill conditions | Allows you to select and edit a pre-saved set of processing conditions for the Underfill Encapsulation process. |