Configuration Editor Reference

The configuration editor allows you to adjust the settings for your machine and material combination. You can adjust the following properties for each configuration:

• Name
• Description
• Type
• Slicing parameters
• Contour parameters
• Hatching parameters
• Downskin
• Upskin
• Supports
• Imaging priority
• Spot size
• Build rate
• Recoating time

The way in which these settings are adjusted depends on the configuration type selected. The default, Simple type, allows you to enter values for each property in a tabular format. If you switch to the Programmable type, you can enter values for each property in XML format. If you switch to the Diagram type, you are presented with a series of blocks representing the various configuration properties laid out in a network graph. With the diagram type, you can add a variety of filters and functionality to help define your configuration.

Note: If you switch away from the Simple type, you cannot switch back. You can only switch between Diagram and Programmable at that point.