Add a Soffit

You can associate soffits with other elements, such as walls and a roof. If a wall or roof changes or moves, the soffit adjusts accordingly.

You can also create soffits that are not associated with other elements. To create non-associative soffits, use the Lines tool while in sketch mode.

Create a sloping soffit by drawing a slope arrow or changing properties of the boundary line. See Sloped Surfaces.

1. Click Architecture tabBuild panelRoof drop-down (Roof: Soffit).
2. Click Modify | Create Roof Soffit Boundary tabDraw panel (Pick Roof Edges).

   This tool creates a locked sketch line.

3. Highlight the roof, and click to select it.
   

   Roof selected with Pick Roof Edges tool

4. Click Modify | Create Roof Soffit Boundary tabDraw panel (Pick Walls), highlight the outside faces of the wall beneath the roof, and click to select.
   

   Wall highlighted for soffit line

   

   Sketch lines for soffit after picking walls

5. Trim the excess sketch lines and close the sketch loop.
   

6. Click (Finish Edit Mode).

   To see the soffit better, create a section view through the plan view that shows the wall meeting the roof.

   

   Roof, soffit, and wall in section view

   Note: The Join Geometry tool was used to join the soffit and the roof in the previous illustration. To complete the image, join the soffit to the wall, and the wall to the roof.