Review these cases if you encounter issues using the Precast CAM Export for manually created assemblies.
- The following elements or cases are not exported:
- Rebar containers.
- Welding of reinforcement.
- Lattice girders (except the ones created by the Autodesk Structural Precast Extension for Revit for girder slabs).
- Rebar couplers as standalone elements.
- Prestressing elements are not supported.
- Geometrical export:
- Export only prismatic cutouts.
- Export only geometry prismatic in the Z direction.
- Elements such as reveals or profiles are not supported.
- Solid wall assemblies containing loadable families that can host rebar:
- Must be prismatic in the Z direction of the assembly (no reveals, profiles, etc.).
- Additional sweeps or extrusions on the wall are not supported.
- Chamfers, vertical profiles at edges or corners are supported as line attributes.
- Stacked walls are not supported.
- The local coordinate system is based on the assembly origin.
- Solid slab assemblies containing loadable families that can host rebar:
- Must be prismatic in the Z direction of the assembly.
- Additional sweeps or extrusions on the slab are not supported.
- Chamfers and keyways are supported as line attributes.
- Sloping slabs are not supported.
- Mounting parts:
- Must be in assemblies.
- Only the bounding box of the mounting part and its position are defined.
- Adaptive components or multi-pick families are not supported.
- The following categories to define mounting parts are supported: generic models, specialty equipment, electrical equipment, electrical fixtures, lighting devices, lighting fixtures, and structural connections.
- Changing the assembly axis in not taken into account for wall assemblies.