To Remove Slab/Roof Slab Interference Conditions

Use this procedure to remove an interference condition from a slab or roof slab.

The object from which the interference condition was created remains in the drawing; only the interference condition is removed.

1. Select the slab or roof slab.

   if the object selected is…	then…
   a slab	click Slab tabModify panelInterference Condition drop-downRemove.
   a roof slab	click Roof Slab tabModify panelInterference Condition drop-downRemove.

2. Select the objects to remove as interference conditions, and press Enter.
   Note: You can also remove interference conditions through the Interference Conditions worksheet.