To Trim a Wall Intersection Component

Use this procedure to modify a wall intersection by trimming a component. The trim boundary can be a line, arc, circle, polyline, or wall component edge.

1. Select the wall segment with the wall intersection to modify.
2. Click Wall tabCleanup panelCleanup Edit In Place.

   Vertex and Edge grips display for the first wall component, based upon the wall style index.

3. Select the component that you want to trim.

   You can trim multiple components at a time to a trim boundary. Press Esc to clear component selection.

4. Click Edit In Place tabModify panelTrim.
5. Either specify points to delineate a trim boundary, or press Enter to select a trim boundary.
6. Specify the side to trim.
7. Exit the edit-in-place session:

   If you want to...	Then...
   Discard any changes you made during the edit-in-place session	click Edit In Place tabEdits panelCancel.
   Save any changes you made during the edit-in-place session	click Edit In Place tabEdits panelFinish.

   In the following example, a concrete wall corner is trimmed to a line trim boundary.