To Edit Hole Dimensions

You can edit hole dimensions using either the property panel or Hole Dimension dialog.

Use one of the following methods to edit Hole dimensions:

Double-click Feature (uses Property panel)

1. In the browser, double-click the hole feature.
2. In the property panel, modify the parameters. You can also edit the parameters in the canvas or graphics area. When you are editing a hole dimension using keyboard input you can switch to using the mouse and manipulators without having to click another command to select the manipulator.
3. Click OK.

Edit Feature (uses Property panel)

1. Right-click the hole feature and click Edit Feature.
2. In the property panel, modify the parameters.
   Note: Click the fly-out menu of a value field to use methods such as Measure, Reference Dimension, Tolerance, and user parameters to modify the value. For more details, see the Value Fields section of To Create Holes.
3. Click OK.

Show Dimensions (uses Hole Dimensions dialog)

1. Right-click the hole feature and select Show Dimensions.
2. Double-click the hole dimension.
3. In the Hole Dimensions dialog box, modify the values.
   Note: If the hole does not contain the associated feature, values are unavailable.

   • Hole Diameter. Sets the value for the diameter of the hole. Enter a value, or click the arrow to select a value, use the Measure command, Show Dimensions, or set tolerances in the Tolerance dialog box.
   • Counterbore Diameter. Sets the value for the diameter of the counterbore or countersink.
   • Hole Depth. Sets the value for the depth of the hole.
   • Counterbore Depth. Sets the value for the depth of the counterbore or spot face.
4. Click OK.