To Modify or Apply End Treatments to Frames

What's New: 2019, 2019.1, 2019.2, 2020

Start in the assembly environment with an assembly model open.

Miter

Miter the ends of frame members.

1. On the ribbon, click Design tab Frame panel Miter .
2. Do one of the following:
   • Select a single pair of frame members to miter.
   • Select multiple frame members to miter.
3. Optionally, select a saved Preset to configure the miter.
4. To replace an existing end treatment with the miter, click the Advanced Settings Menu and select Delete existing end treatments. Clear the selection if it is not necessary to delete an existing end treatment.
5. Select a miter type:
   • Full Miter Cut
   • Bisect Miter Cut

   The following image displays the difference in miter cut types when applied to frame members of different sizes.

   

6. Select or enter a distance between the mitered cuts.
7. Select an offset type:
   • Default
   • Flipped
   • Symmetric
8. Click Apply.
9. Continue to apply miters to frame members as needed. When you finish, click OK.

Note: For a straight frame member with a miter on each end, such as an angled beam between two opposite inside corners, the correct frame length computes automatically based on your selections.

Trim and extend two frame members at their ends.

1. On the ribbon, click Design tab Frame panel Trim To Frame.
2. Click to select the first frame member to trim or extend.
3. Click to select the second frame member to trim or extend. To include a published notch profile, click Apply notch profile.

   To include a published notch profile, click Apply notch profile.

4. If you intend to replace an existing end treatment with the cut, select the check box for Delete existing end treatments. Clear the check box if it is not necessary to delete an existing end treatment.
5. Select or enter a vertical offset distance.
6. Select or enter a horizontal offset distance.
7. Click Apply.
8. Continue to trim or extend frame members as needed. When you finish, click OK.

Trim/Extend To Face

Trim or Extend a frame member to a model face.

1. On the ribbon, click Design tab Frame panel Trim/Extend .
2. Click to select a frame member to cut or lengthen.
3. Click to select a model face to use for the cut or extend.
4. Optionally, check Trim selected part to choose the side to keep as shown in the following image:

   

5. To replace an existing end treatment with the cut, select the check box for Delete existing end treatments. Clear the check box if it is not necessary to delete an existing end treatment.
6. Select or enter the offset distance between the frame member and model face.
7. Click Apply to extend or trim the frame member to the model face you selected.
8. Continue to trim or extend frame members as needed, and then click OK.

The values generated by applying the Trim/Extend command to cut angles display in the iProperties/Custom tab as CUTDETAIL1, CUTDETAIL2, etc. and can be included in the Bill of Materials and Parts List.

Note: Use the Rebuild All command to apply this behavior to models created in versions of Inventor prior to Inventor 2019: Open an assembly file that was created in an earlier version of and click Manage tab Update panel Rebuild All.

Notch

Trim and extend frame members at their ends to provide a notched fit using one of the following options:

• Basic Profile
• Custom I Template
• Custom Profile
  Note: To use the Custom Profile option, you must first author the notch shape in the Content Center, and then consume the member containing the custom notch profile in the assembly.

For more information, click the How to Create Custom Profile in the panel or see Author Frame Generator Notch End Treatments

1. On the ribbon, click Design tab Frame panel Notch .
2. Optionally, select a saved Preset to configure the notch.
3. To replace an existing end treatment with the notch, click the Advanced Settings Menu and select Delete existing end treatments. Clear the selection if it is not necessary to delete an existing end treatment.
4. Click to select the frame members to receive the notch.
5. Click to select the frame members that represent the shape of the notch.
6. Choose one of the following:
   • Basic Profile to set a single offset value for the notch.

     

   • Custom I Template to set multiple offset values.

     

   • Custom Profile, if available, to use the custom notch profile in the Content Center family.

     

7. Optionally:

   

   • Check Extend Notch Profile, if available, to extend the profile to an intersection.
   • Check Perpendicular Cut, if available, to create precise intersections such as a laser cut notch for a pipe.
8. Click Apply to notch the selected frame members.
   
9. Continue to notch frame members as needed. When you finish, click OK.

Lengthen/Shorten Frame Member

Extend or retract one or both frame member ends.

1. On the ribbon, click Design tab Frame panel Lengthen/Shorten .
2. Optionally, select a saved Preset.
3. To replace an existing end treatment, click the Advanced Settings Menu and select Delete existing end treatments. Clear the selection if it is not necessary to delete an existing end treatment.
4. Select the frame members to lengthen or shorten. Pick point a point on the frame member near the end to extend or retract.
5. Select an offset type:
   • Default
   • Flipped
   • Symmetric
   • Asymmetric
6. Enter a value for the offset between the frame member and the model face. A positive number extends, and a negative number retracts.
7. Click Apply to extend or retract the frame members you selected.
8. Continue to extend or retract members as needed. When you finish, click OK.

Remove End Treatments

Removes end treatments and returns the selected frame members to their original insertion state.

1. On the ribbon, click the Design tab. Click the Frame panel drop-down arrow and select Remove End Treatments.
2. Click to select the frame members from which to remove the end treatments.
3. Click Apply to remove the end treatments from the selected frame members.
4. Continue to remove end treatments as needed. When you finish, click OK.