Dimension Type Properties

Change type properties for permanent dimensions to modify their appearance and adhere to organizational or industry standards.

Modify Tab Properties panel (Type Properties).

Name	Description
Graphics
Dimension String Type	Specifies the formatting method for a string of dimensions. This parameter is available for linear dimension styles. Note: Arc length dimensions are linear dimensions and have parameters (Dimension String Type and Ordinate Dimension Settings) for creating baseline and ordinate dimensions, but these parameters have no effect on arc length dimensions. Options include: Continuous. Places multiple dimensions end to end. Baseline. Places stacked dimensions measured from the same baseline. Ordinate. Places a dimension string with values measured from the dimension origin.
Leader Type	Specifies the type of line to draw for the leader. Options include: Line. Draws a two-part straight line leader from the dimension text to the dimension line. The first part of the leader begins either at the text box or under the text (determined by the Text Location property) and extends to a junction point in the line called the shoulder. The length of the first part of the leader is determined by the Shoulder Length property. The second part of the leader begins at the shoulder and extends to the dimension line. Arc. Draws an arc line leader from the dimension text to the dimension line.
Shoulder Length	Specifies the length of the leader part that extends from the end of the text box to the shoulder (only available for Line Leader Type).
Leader Tick Mark	Specifies the mark that is applied to the tip of the leader, at the dimension line.
Show Leader When Text Moves	Specifies how the leader displays when the text is moved away from its origin. Options include: Away From Origin. The leader displays when the dimension text is moved away from its origin. When the text is moved back to its origin, it will snap into place and the leader is hidden. Beyond Witness Lines. The leader displays when the dimension text is moved beyond the witness line.
Tick Mark	The name of the tick mark style used for dimension witness lines.
Line Weight	Sets the line weight number that designates thickness of the dimension line and dimension leader. You can select from a list of values defined in Revit or define your own. You can change the definition of the line weights by clicking Manage tabSettings panelAdditional Settings drop-down (Line Weights). See Line Weights.
Tick Mark Line Weight	Sets the line weight that designates thickness of the tick mark. You can select from a list of values defined in Revit or define your own.
Dimension Line Extension	Extends the dimension line beyond the intersection of the witness lines to the specified value. When you set this value, this is the size at which the dimension line plots, if you are printing at 100 percent.
Flipped Dimension Line Extension	Controls the extent of the dimension line beyond the flipped arrow if the arrow flips on the ends of the dimension string. This parameter is only enabled when the tick mark type parameter is set to an arrow type. See Change the dimension tick mark.
Witness Line Control	Switches between the fixed gap functionality and the fixed dimension line functionality.
Witness Line Length	If Witness Line Control is set to Fixed to Dimension Line, this parameter becomes available. Specifies the length of all witness lines in the dimensions. When you set this value, this is the size at which the witness line plots, if you are printing at 100 percent.
Witness Line Gap to Element	If Witness Line Control is set to Gap to Element, this parameter sets the distance between the witness line and element being dimensioned.
Witness Line Extension	Sets the extension of a witness line beyond the tick mark. When you set this value, this is the size at which the witness line plots, if you are printing at 100 percent.
Witness Line Tick Mark	Designates the tick mark display at the end of a witness line.
Centerline Symbol	You can select any of the annotations symbols loaded in the project. The centerline symbol appears above the witness lines that reference the centerlines of family instances and walls. If the witness line does not reference a center plane, you cannot place a centerline symbol above it.
Centerline Pattern	Changes the line pattern of the witness lines of the dimension, if the dimension references are the centerlines of family instances and walls. If the references are not at the centerline, this parameter does not affect the witness line pattern.
Centerline Tick Mark	Changes the tick mark at the ends of the centerline of a dimension.
Interior Tick Mark	Designates the tick mark display for inner witness lines when adjacent segments of a dimension line are too small for arrows to fit. When this occurs, the ends of the short-segment string flip, and the inner witness lines display the designated interior tick mark. This parameter is only enabled when the tick mark type parameter is set to an arrow type. See Change the dimension tick mark.
Ordinate Dimension Settings	Specify settings for ordinate dimensions. This parameter is available when the Dimension String Type parameter is set to Ordinate. For more information, see Create an ordinate linear dimension style
Color	Sets the color of dimension lines and leaders. You can select from a list of colors defined in Revit or define your own. The default value is black.
Dimension Line Snap Distance	To use this parameter, set the Witness Line Control parameter to Fixed to Dimension Line. With these parameters set, additional snapping is available that aids in stacking linear dimensions at even intervals. This value should be greater than the distance between the text and the dimension line, plus the height of the text.
Text
Width Factor	Specifies a ratio to define the elongation of the text string. A value of 1.0 has no elongation.
Underline	Underlines the permanent dimension value and text.
Italic	Applies italic formatting to the permanent dimension value and text.
Bold	Applies bold formatting to the permanent dimension value and text.
Text Size	Specifies the size of the typeface for the dimension.
Text Offset	Specifies the offset of the text from the dimension line.
Read Convention	Specifies the start position and direction of the dimension text.
Text Font	Sets the Microsoft® True Type fonts for the dimensions.
Text Background	If you set the value to opaque, the dimension text is surrounded by a box that overlaps any geometry or text behind it in the view. If you set the value to transparent, the box disappears and everything not overlapped by the dimension text is visible.
Units Format	Click the button to open the Format dialog. You can then set the format of the units with the dimension. See Setting Project Units.
Alternate Units	Specifies whether to display alternate units in addition to the primary units of the dimension, and the position of the alternate units. Options include: None. Alternate units will not display. Right. Alternate units display in-line to the right of the primary units. Below. Alternate units display below primary units. See Define alternate dimension units.
Alternate Units Format	Click the button to open the Format dialog. You can then set the format of the alternate units for the dimension type. See Setting Project Units.
Alternate Units Prefix	Specifies a prefix to display with the alternate unit. For example, you could display square brackets around the alternate unit by entering [ as the Prefix and ] as the Suffix (see Alternate Units Suffix below).
Alternate Units Suffix	Specifies a suffix to display with the alternate unit.
Show Opening Height	Place a dimension whose witness lines reference the same insert (window or door) in a plan view. If you select this parameter, the dimension includes a label that shows the height of the opening for the instance. The value appears below the dimension value you initially placed.
Text Location	Specifies where dimension text is placed in relation to the leader (only available for Line Leader Type). Options include: Inline. Places the text and leader on the same line. Above. Places the text above the leader line.
Other
Center Marks	Shows or hides the radial/diameter dimension center mark.
Center Mark Size	Sets the size of the radial/diameter dimension center mark. This property is enabled when Center Marks is selected.
Diameter Symbol Location	Specifies the location for the prefix text for diameter dimensions.
Radius Symbol Location	Specifies the location for the prefix text for radial dimensions.
Diameter Symbol Text	Specifies the prefix text for diameter dimension values (default is Ø).
Radius Symbol Text	Specifies the prefix text for radius dimension values (default is R).
Equality Text	Specifies the text string to be used for all EQ text when an equality constraint is added to the dimension string. The default value is EQ. Changing this value changes the equality text for all dimensions of this type.
Equality Formula	Specifies the dimension equality formula used to display equality dimension labels. Click the button to display the Dimension Equality Formula dialog. (Available for aligned, linear, and arc dimension types.) See Defining an Equality Formula.
Equality Witness Display	Specifies the display of interior witness lines in equality dimensions (only available for aligned, linear, and arc length dimensions). Options for Interior Witness Lines include: Tick and Line. Displays the interior witness line according to the type properties specified. Tick Only. Interior witness lines do not display, but the Witness Line Extension type value is used above and below the dimension line. Hide. Interior witness lines and tick marks for interior segments do not display.