The SettingsCmdCreateIntersection.SettingsCmdCurbReturnParameters type exposes the following members.
Properties
| Name | Description | |
|---|---|---|
 | ChamferFilletLengthAlongIncomingLane |
When Chamfer is selected as the curb return type, this option lets you specify the length of the curb return’s chamfer fillet along the incoming lane.
|
| ChamferFilletLengthAlongOutgoingLane |
When Chamfer is selected as the curb return type, this option lets you specify the length of the curb return’s chamfer fillet along the outgoing lane.
|
| CircularFilletRadius |
When Circular Fillet is selected as the curb return type, this option lets you specify the radius for the circular fillet on the curb return.
|
| CurbReturnType |
Specifies the type of curb return used for the intersection: Chamfer, Circular Fillet, or 3-Centered Arcs.
|
| LengthOfCurve1 |
When 3-Centered Arcs is selected as the curb return type, this option lets you specify the length for the first curve on the curb return.
|
| LengthOfCurve3 |
When 3-Centered Arcs is selected as the curb return type, this option lets you specify the length for the third curve on the curb return.
|
| RadiusOfCurve1 |
When 3-Centered Arcs is selected as the curb return type, this option lets you specify the radius for the first curve on the curb return.
|
| RadiusOfCurve2 |
When 3-Centered Arcs is selected as the curb return type, this option lets you specify the radius for the second curve on the curb return.
|
| RadiusOfCurve3 |
When 3-Centered Arcs is selected as the curb return type, this option lets you specify the radius for the third curve on the curb return.
|