To run the model, from a command line run:
$ pan -b t11
The analysis progress is written to file multistl_thermal.out. To check progress run:
$ tail t11.out
After the analysis completes, the last few lines of the output file multistl_thermal.out should be similar to the following:
inc = 38 time = 15831.914 iter = 1 eps = 0.45725E+02 inc = 38 time = 15831.914 iter = 2 eps = 0.14404E-12 Finished writing file results\ t11_38.case Writing record: 2, time: 15831.9140625000 Increment end CPU wall for increment 38 = 00:00:00.52, since start = 00:00:33.04 Layer end Mesh preview volume = 4487.62499999999 Activated volume = 4487.62499999999 Activated percentage = 100.000000000000 Finished writing file .\ t11.case Analysis completed **************************** 1 Warning **************************** CPU wall for printing = 00:00:23.22 CPU wall = 00:00:34.46 CPU total = 00:01:41.33 Peak RAM used for this process = 181,672 kB END Autodesk Netfabb Local Simulation
Actual CPU times will differ.
To run the model, from a command line run:
$ pan -b m11
After the analysis completes, the last few lines of the output file multistl_mech.out should be similar to the following:
------------------------------------------ Support structure removal time increment ------------------------------------------ inc = 40 time = 18831.914 iter = 1 eps = 0.29089E+03 inc = 40 time = 18831.914 iter = 2 eps = 0.31843E-09 Optimizing rigid body motion... Initial RMS displacement = 1.045277E-01 Optimized RMS displacement = 1.030341E-01 Number of optimization iterations = 235 Rotation matrix = 1.000000E+000 -5.369748E-007 7.783688E-006 5.369652E-007 1.000000E+000 1.233429E-006 -7.783688E-006 -1.233425E-006 1.000000E+000 Translation = 9.521316E-005 3.760801E-006 1.760589E-002 Finished writing file results\ m11_40_f.case Finished writing file results\ m11_40.case Increment end CPU wall for increment 40 = 00:00:01.99, since start = 00:01:10.28 Layer end ------------------------------------------------------ Total number of equilibrium iterations: 79 Mesh preview volume = 4487.62499999999 Activated volume = 4487.62499999999 Activated percentage = 100.000000000000 Finished writing file .\ m11_f.case Finished writing file .\ m11.case Analysis completed **************************** 12 Warnings **************************** **************************** 1 Critical warning **************************** CPU wall for support removal = 00:00:02.04 CPU wall = 00:01:10.33 CPU total = 00:04:05.03 Peak RAM used for this process = 801,804 kB END Autodesk Netfabb Local Simulation
Actual CPU times will differ.
Each of the warnings note a support structure element failure.