Using the Reinforcement Design Extension, you can:
- verify reinforcement defined in
Revit for a selected RC structure elements. Verification is performed in
Robot in compliance with the requirements of an RC design code that you select.
Note: You can verify only reinforcement that was generated using a dedicated Revit Extension (such as Reinforcement of beams or Reinforcement of columns). It is not possible to verify reinforcement that was drawn in
Revit.
- design (generate) reinforcement in
Robot for an RC structure element selected in
Revit. Reinforcement is calculated and generated in Robot in compliance with the requirements of an RC design code that you select.
- import reinforcement from
Robot to
Revit for concrete elements selected in Revit or Robot.
Reinforcement Design supports 3 types of the structure concrete elements: beams, columns, and spread footings.
Note: To ensure that reinforcement in RC structure elements is calculated and verified correctly, install the latest version of
Robot on your computer.