Modify a load definition from the graphic area

You can modify a load definition even if the load is already applied to the structure.

Select Loads from the list of layouts in the standard toolbar to be able to visualize the loads symbols.

1. Ensure no object is selected in the drawing area.
2. Move your cursor over a load symbol until it becomes blue.
3. Right-click the load symbol, and then click Load Properties. A dialog corresponding to the type of load opens.
4. Change the values of the load as necessary, and then click Add. The Load Definition dialog opens.
5. Specify on which object you want to apply the change.
   • Select only for the indicated one to modify the definition of the load that was initially selected.
   • Select for objects from the load list to modify all the objects that share the same load definition as the load that was initially selected.
   • Select for the object selection, and then select objects in the drawing area to modify their definition.
6. Click OK. The drawing area updates with the new load definition.