Once the Deformations tab is selected in the Diagrams dialog box accessed from the Results menu, the dialog box shown below will appear.
Note: The designations presented in the above dialog box depend on a selected code of RC structure element design.
The following values may be selected for presentation in the above dialog box:
in the Deflections field
- From Dead Loads Fgi (short-term deflections)
- From Dead Loads Fgv (long-term deflections)
- From Partition Walls Fji (short-term deflections caused by a dead load applied at the time of partition wall construction)
- From All Loads Fpi (short-term deflections caused by all loads - dead and live - carried by the element under analysis)
- Total F = Fgv - Fji + Fpi - Fgi
in the Strains for ULS field
- Tension Bars
- Compression Bars
- Concrete
in the Stresses for SLS field
- Tension Bars
- Compression Bars
- Concrete
Note: A representative color for presentation in the diagram is displayed beside the corresponding value.
Note: If in the Calculation optionsdialog box (the General tab, the Advanced dialog box) the Display diagrams for all combinations option is switched on, it is possible to display both an envelope and each load combination separately.