Create Section Sheets Dialog Box

Use this dialog box to create paper space layouts that contain the section views in your drawing.

You must use the Production placement option in the Create Multiple Section Views wizard before using the Create Section Sheets command. For more information, see Section Placement Page (Create Multiple Section Views Wizard).

All layouts are created in the current drawing, using the template you selected when you created the section views.

Tip: You can use the object selection button to quickly select a section view group in the drawing. Or, you can use the drop-down lists to select the alignment, sample line group, and section view group. The section view group must have been created using the Production option of the Create Multiple Views command.

Select Alignment

Filters the Sample Line Group Name list so it shows the available sample line groups for the selected alignment.

Note: Select a section view group directly or use the Select Alignment and Sample Line Group Name lists to filter the Select Section View Group selection.

Sample Line Group Name

Filters the list of available section view groups.

Select Section View Group

Specifies the section view group for which to create layouts.

Layout Settings

Layout Name

Specifies the name template for the layouts. All layouts are created in the current drawing.

Sheet Set

Note: A sheet subset is created in the Sheet Set File each time the command is run. Sheets are not overwritten.

New Sheet Set

Creates a new sheet set of the layouts that are created. Enter the sheet set name.

Add To Existing Sheet Set

Adds the layouts to an existing sheet set.

• Click to select a sheet set from a physical drive.
• Click to select a sheet set from a vault.
  Note: This option is available only if Autodesk Vault is installed.

Sheet Set Storage Location

Specifies the sheet set storage location for both new and existing sheet sets.

• Click to browse to a physical drive to store the sheet set.
• Click to browse to a vault location to store the sheet set.
  Note: This option is available only if Autodesk Vault is installed.