Use this tab to specify which data boxes are included in the set, along with their styles and positions relative to the section view grid.
- Band Type
-
Specifies the type of data box to add to the set.
- Select Band Style
-
Specifies the style for the band.
To edit a style or create a new one, click
and select from the list of operations. To examine the details of an existing style, select the style name in the list. Click 
. - Add>>
-
Adds the specified data box type to the style set. Before clicking, ensure that the settings are correct for data box type, style, and location.
List Of Bands
- Location
-
Specifies either the top or bottom of the section view. For the current location, the table below this field shows the bands in the current band style set.
- Band Type
-
Displays the data box type.
- Style
-
Specifies the style for the band type.
- Description
-
Specifies the optional description of the band style.
- Gap
-
Specifies the distance in plotted units between the current data box and the previous data box (or the nearest section view axis).
For bands below the section view grid, the specified gap is measured from the top of the current band to the bottom of the previous band (or the section view bottom axis, if the current band is the first one).
Similarly, for bands above the section view grid, the specified gap is measured from the bottom of the current band to the top of the previous band (or the section view top axis, if the current band is the first one).
- Major Interval
-
Specifies the section view data box major interval distance.
- Minor Interval
-
Specifies the section view data box minor interval distance.
- Label End Offset
-
Specifies whether or not the end of the band is labeled.
- Weeding
-
Used only for labels at vertical geometry points on Section Data boxes. Vertical geometry points or gradient breaks that are closer than the weeding factor are removed, making it easier to read the remaining labels. Enter a positive number to specify a label exclusion distance.
- Stagger Labels
-
Specifies the location of the label staggering line: No staggering, Stagger both sides, Stagger to right, or Stagger to left.
- Stagger Line Height
-
Specifies the height of the label stagger line.
-
-
Moves the selected data box up in the list.
Note: The order in this list is the order in which the bands appear below/above the section view. -
-
Moves the selected data box down in the list.
-
-
Deletes the selected data box from the list and removes it from the section view.
- Match Major/Minor Increments to Vertical Grid Intervals
-
Specifies if the cross section box major/minor intervals for section views matches the section view style’s major/minor grid spacing interval distances. Select the check box to match major/minor increments to vertical grid intervals. If this check box is selected, the major/minor interval fields in the List of Bands table are unavailable.