Open InfraWorks Model Dialog Box

Use this dialog box to select the Autodesk InfraWorks data to bring into Autodesk Civil 3D, to specify a co-ordinate system for the Autodesk Civil 3D drawing and to specify a file that controls settings for the objects.

InfraWorks Model

Specifies a InfraWorks model to open. Click to select a local InfraWorks model (SQLITE file) or an IMX file that was exported from InfraWorks. When you select a SQLITE file, the most-recently accessed InfraWorks proposal in the model is used.

Note: If InfraWorks is not installed on your computer, the option to select a SQLITE file is not available.

Coordinate System

Displays information about the co-ordinate systems of the InfraWorks model and the Autodesk Civil 3D drawing.

Set a Coordinate System

Opens a task dialog box with options you can use to specify the co-ordinate system of the Autodesk Civil 3D drawing.

Autodesk Civil 3D must have a co-ordinate system specified in order to bring in InfraWorks data. If the co-ordinate systems in the InfraWorks model and the drawing don't match, the data in the InfraWorks file will be transformed into the co-ordinate system specified in the Autodesk Civil 3D drawing.

The following options are available in the task dialog box:

• Use the InfraWorks Model Co-ordinate System: Sets the drawing to the UCS used in the InfraWorks model.
  Important: InfraWorks models created with the Model Builder use the LL84 co-ordinate system by default. However, Autodesk Civil 3D doesn't support co-ordinate systems that are based on latitude-longitude co-ordinates. Therefore, if the InfraWorks model is set to LL84 or another latitude-longitude co-ordinate system, use one of the other options in the task dialog box.
• Select a Coordinate System for the Drawing: Opens the Drawing Settings dialog box, where you can specify a coordinate system.
• Use Coordinate System [UTM coordinate system]: Sets the drawing to a suggested UTM coordinate system.
  Note: This option is available when the drawing is set to use metric units.

Selection Area

Note: The Selection Area options are grayed out and unavailable if you selected an IMX file to open.

Extents of InfraWorks Model

Brings in the entire extents of the InfraWorks model.

Area of Interest

Enables you to select an area using the Select Area option.

Select Area

Enables you to define the area into which you want to bring InfraWorks data. Clicking Select Area turns on the display of an online map in your drawing so you can see the area to select. When you select an area of the map, the rectangle that forms the selection window acts as a boundary for the surfaces that will be brought into Autodesk Civil 3D. Other objects, such as roads, that are inside or that cross the selection window are brought into Autodesk Civil 3D in full.

Using online map data requires an Autodesk® 360 account and an Internet connection. If you do not have an Autodesk 360 account, you can create one when the Autodesk 360 log in dialog box is displayed, or you can go to www.autodesk.com/launch-a360 to create an account.

Note: If you would like to turn off the display of the map after you open the InfraWorks model, you can click Geolocation tab On-line Map panel Map Hybrid Map Off.

Object Settings

Folder Specification

Specifies the folder in which the object settings file you want to use is located. Click to select a folder.

An object settings file specifies what types of objects will be brought into Autodesk Civil 3D and also specifies settings for the objects. You can set up multiple files to handle different scenarios.

Pre-defined object settings files are provided in the following folders:

• C:\ProgramData\Autodesk\C3D 2022\eng\Data\InfraWorks Object Settings\Metric
• C:\ProgramData\Autodesk\C3D 2022\eng\Data\InfraWorks Object Settings\Imperial

The following pre-defined object settings files are provided:

• All Objects.xml: Brings in all types of InfraWorks objects
• Design Objects.xml: Brings in only InfraWorks design objects
• Planning Objects.xml: Brings in only InfraWorks planning objects

Selection List

Specifies the settings file that you want to use.

Object Settings File Commands

Creates a new file, copies the current file, or edits the current file.

Selection Set

Refine Selection Set

Opens the Refine Selection Set dialog box which you can use to refine the selection set of objects that will be brought into Autodesk Civil 3D.