Euler XYZ Rotation Controller

The Euler XYZ Rotation controller is a compound controller that combines separate, single-value float controllers to specify an angle of rotation about each of the X, Y, and Z axes. Euler XYZ is not as smooth as quaternion rotation (used by the TCB Rotation controller), but it is the only rotation type that you can use to edit rotation function curves.

• Track View > Select a rotation track in the Track View hierarchy. > Assign Controller > Euler XYZ
• Select an object in the viewport > Motion panel > Assign Controller rollout > Select the Rotation track. Euler XYZ is assigned as the default controller.

The Euler XYZ Rotation controller assigns individual tracks to the X, Y, and Z components of position, rotation, and scale transforms. However, the controller assigns three keys (one for each axis), by default. To avoid this, you can use Customize User Interface actions to create explicit axis keys. These are available in the Main UI group Set Key Tools category.

The Gimbal reference coordinate system is intended for use with this controller. With other coordinate systems, rotating about one axis always changes at least two tracks. With Gimbal rotation, rotating about one axis changes only one track, making it easier to edit function curves.

Euler versus TCB Rotation

Euler rotation offers several advantages over the TCB Rotation controller, which was the default rotation controller prior to 3ds Max 5. Euler rotation provides function curves, while TCB does not. Euler rotation allows for three separate curves that can be manipulated in the Curve Editor. TCB rotations can be controlled only with tension, continuity, and bias settings, making it difficult to keyframe and manipulate X, Y, and Z rotation independently.

On the other hand, TCB rotation allows for rotation greater than 180 degrees on a given keyframe. If you turn on the Rotation Windup option, you can get rotation values greater than 360 degrees.

Tip: If you’re used to working with TCB rotation, you might find it difficult to adapt to the Euler workflow. In that case, you might want to assign TCB as the default rotation controller. See Specifying Default Controllers.

Euler Rotation and the Waveform Float Controller

Because the Euler Rotation controller uses radians, unit adjustments should be made when other controllers are applied to Euler axes. For example, the Waveform Float controller has a default amplitude of 100 in the Characteristic Graph. When the Waveform Float controller is applied to an Euler axis, the default amplitude is 100 radians. This sets the Amplitude setting to 5729.598 (the number of degrees in 100 radians).

Euler Rotation and the Noise Float Controller

When a Noise Float controller is applied to an Euler axis, the default Strength setting is 286.479 or 50 percent of 10 radians in degrees (maximum deflection).

Euler Rotation and the MIDI Motion Capture Controller

When a MIDI Motion Capture controller is applied, the Parameter Scaling is taken in radians so that the Max. default setting of 1.0 results in an upper boundary of 57.2958 degrees.

Procedures

Example: To use Euler XYZ Rotation:

1. Create a box.
2. Go to the Motion panel and make sure the assigned rotation controller is Euler XYZ. If not, highlight the Rotation track in the Assign Controller rollout list, click (Assign Controller), and then choose Euler XYZ in the Assign Controller dialog list. Click OK.
3. Turn on .
4. At the bottom of the PRS Parameters rollout, click Rotation.
5. On the Euler Parameters rollout, click the X rotation axis button, if necessary.
6. In the Create Key group of the PRS Parameters rollout, click Rotation.

   3ds Max creates a rotational key.

7. Move the time slider to frame 50.
8. Again, in the Create Key group of the PRS Parameters rollout, click Rotation.
9. On the Key Info (Basic) rollout, enter 500 in the Value field.
10. On the Euler Parameters rollout, click the Z rotation axis button and then enter 90 in the Value field of the Key Info (Basic) rollout.

    Play the animation. The box rotates 500 degrees around the X axis and 90 degrees around the Z axis. In this case the X-axis rotation takes place first, and then Z-axis rotation.

To use Euler XYZ with List controllers for local rotation control:

You can mimic the local Euler rotation controller (available in earlier versions of 3ds Max) by combining a list controller with an Euler XYZ rotation controller.

1. Select the object for which you want to have local rotational control. For example, create a teapot and a dummy.
2. Animate the dummy.
3. Open the Motion Panel.
4. On the Assign Controller rollout, select the Rotation transform, then assign a LookAt controller to teapot, with the dummy assigned as the LookAt Target.

   You now have an object with rotation controlled through the dummy.

5. With the Rotation: LookAt controller selected in the window, again click (Assign Controller) and pick Rotation List.

   Now there is a list controller, with the LookAt Constraint applied as the first rotation controller in the list.

6. Scroll down in the window and select the entry labelled Available, then again click Assign Controller.
7. Choose Euler XYZ.

   You now have a list controller with a LookAt Rotation as the first controller and an Euler XYZ as the second controller.

8. In the Rotation List rollout, highlight Euler XYZ in the Layers window, then click Set Active.
9. In the Euler Parameters rollout, change the Axis Order to ZYX.

   Now you can animate the rotation independent of the LookAt rotation control. It should now behave the same as the Local Euler controller that was available in versions 4 and earlier.

Interface

Euler parameters are displayed in the Motion panel.

The Euler parameters rollout is displayed when Rotation is selected in the PRS Parameters rollout.

Axis Order

Selects the order that rotations are calculated. The default is X,Y,Z order, where the X axis is rotated first.

X

Displays controller properties for X axis rotation angle.

Y

Displays controller properties for Y axis rotation angle.

Z

Displays controller properties for Z axis rotation angle.

Each axis uses its own independent controller using the float data type. For example, the X and Y Rotation axes could use Bezier Float controllers, while the Z rotation axis uses a Noise Float controller.