On this tab of the properties dialog box, you can modify the size of the bolt group defined by two diagonal points.
Note: The intermediate distance and the edge distance are related since the bolt pattern width and length do not change. One value is calculated automatically when the other one is set.
| Option | Description |
|---|---|
| Number X | Defines the number of bolts in the X direction. |
| Number Y | Defines the number of bolts in the Y direction. |
| Total length | Defines the length of the bolt pattern (in the X direction). |
| Total width | Defines the width of the bolt pattern (in the Y direction). |
| Intermediate distance X | Defines the distance between bolts along the X-axis. |
| Intermediate distance Y | Defines the distance between bolts along the Y-axis. |
| Edge distance X | Defines the outer bolt line distance to the bolt pattern edge in the X direction. |
| Edge distance Y | Defines the outer bolt line distance to the bolt pattern edge in the Y direction. |
| Use standard edge distances check box | Optionally, you can use the standard edge distances. The values are set according to the selected bolt type. |
