Use this procedure to relocate a stair by changing the coordinate values of its insertion point. The stair also has an orientation with respect to the WCS or the current UCS. For example, if the top and bottom of the stair are parallel to the XY plane, its normal is parallel to the Z axis. You can change the orientation of the stair by aligning its normal with another axis. You can also rotate the stair on its plane by changing the rotation angle.
- Double-click the stair you want to change.
- In the Properties palette, click the Design tab, expand Basic, and expand Location.
- Select
next to Additional information. - Specify the location of the stair:
If you want to… Then… relocate the stair enter new coordinate values under Insertion Point. locate the stair on the XY plane make the normal of the stair parallel to the Z axis: under Normal, enter 1 for Z, and enter 0 for X and Y. locate the stair on the YZ plane make the normal of the stair parallel to the X axis: under Normal, enter 1 for X, and enter 0 for Y and Z. locate the stair on the XZ plane make the normal of the stair parallel to the Y axis: under Normal, enter 1 for Y, and enter 0 for X and Z. change the rotation of the stair enter a new value for Rotation Angle. - Click OK.