To Manage Body Modifiers

Use this procedure to edit or remove three-dimensional (3D) body modifiers from a stair. You can change the component the body modifier is added to and select a different operation. You can also enter or edit the descriptions of body modifiers.

Note: To remove a body modifier from a stair and restore the modifier as a mass element that you can edit or apply to other stairs.

1. Select the stair you want to change, and click Stair tabModify panelBody Modifier drop-downBody Modifiers.
   Note: You can also access the Body Modifiers worksheet for a selected stair on the Properties palette’s Design tab, under Advanced.
2. Select a body modifier, and change its settings:

   If you want to …	Then …
   apply the body modifier to a different stair component	select a different component for Component.
   change the operation used to apply the body modifier to the stair	select a different operation for Operation: Select Additive to add the body modifier to the stair component. Select Subtract to subtract the shape of the body modifier from the stair component. Select Replace to replace the stair component with the body modifier.
   delete the body modifier from the stair component	select the body modifier, and click .
   enter a description of the body modifier	click Description, enter text, and press Enter.

3. Click OK.