To Specify a Miter Angle for a Curtain Wall Unit Adjacent to Another Object

Use this procedure to manually create a mitered corner between a curtain wall unit and another object, such as a standard wall or a mass element. For example, if your curtain wall unit connects with a standard wall that is at 60-degree angle from the curtain wall unit, you would specify the miter angle as 30.

The miter angle applies to all infills and horizontal edges that are adjacent to the corner. Vertical edges are not affected.

Tip: To quickly identify the start and end of a curtain wall unit, select the curtain wall unit. The Reverse Direction grip points toward the end of the curtain wall unit.
  1. Select a curtain wall unit.
  2. Expand Dimensions.
  3. Miter the curtain wall unit on the start or the end point:
    If you want to miter the curtain wall unit … Then …
    at its start point enter an angle for Start Miter Angle, and press Enter.
    at its end point enter an angle for End Miter Angle, and press Enter.