Use this procedure to change the slope settings of a slab or roof slab, and to specify whether the fascia is to be aligned when the slope is changed.
You can also control the adjustment of the overhang or baseline height of the slab. This constraint applies only to the baseline edge, and it works only when the baseline is horizontal.
- Double-click the slab you want to change.
- On the Properties palette, click the Design tab
Dimensions Slope. - Enter a value for Rise, Run, or Angle to define the slope.
- Select a setting for Hold fascia elevation:
If you want to… Then… force the fascia to align with other slab or roof slab fascias, regardless of style, by adjusting the overhang select By adjusting overhang. force the fascia to align with other slab or roof slab fascias, regardless of style, by adjusting the baseline height select By adjusting baseline height. ignore fascia alignment select No.